The test consists of 80 random questions.
Total questions on this topic: 132
On the figure there are four (4) possible definitions of the term “BREADTH” given. Which one is the correct one?
Breadth is defined as “A” on the figure.
Breadth is defined as “B” on the figure.
Breadth is defined as “C” on the figure.
Breadth is defined as “D” on the figure.
The general background colour to be used on warning signs that indicate emergency or first-aid features, or indicate a safe condition would be:
What will you do when all the fresh water in the survival craft is finished or about to finish?
Start collecting rain water.
Drink only 1 liter of sea water per day.
Use sea water to keep your body wet.
How many buoyant smoke signals are carried in each liferaft with SOLAS A pack?
If you detect a fire on board the ship, dependent on the situation, which of the following actions is the first to be taken?
Try to kill the fire immediately by use of fire-extinguishers or other adequate appliances.
Call the officer on duty.
Check all nearby compartments for survivors.
On a RoRo vessel, what standing instruction should be given to protect the ramps when loading RoRo units?
Units whose weights exceed the ramp load density/SWL must not be loaded.
Damaged units should be rejected for loading.
All RoRo units must be thoroughly checked for damage prior to the loading ramp.
Damaged units should be rejected for loading.
Which of these procedures should crew follow when conducting a search?
Conduct random or spot checks of logical threat areas.
Wait in the area they’ve finished searching until they’re contacted for a status update.
Search the perimeter of the space up to a height of 5 feet.
Stand quietly in various spots around the space, listening for unusual sounds like the tick tock of a clock mechanism.
On a RoRo vessel, what is lashing equipment used for?
To prevent the cargo from shifting during the voyage.
To stop cargo from being stolen.
Adding additional weight to the cargo.
To stop cargo from being stolen.
Once a non dangerous cargo unit has been stowed on board a RoRo vessel, what should duty crew members ensure?
That there is no sign of tampering with internal accessories.
That there is no sign of tampering with internal accessories.
That the duty officer is notified of the vehicle’s position.
That the vehicle is lashed immediately.
Which one of these ropes is very slippery, sinks in water and very stretchy when under tension?
On a RoRo vessel, what should be used to secure cars with aluminium tyre rims?
Wooden wheel chocks only.
8 mm diameter steel wire rope.
A road trailer is marked as follows: SWL 70t; Tare wt. 6t. What is the gross weight of the trailer when carrying it maximum payload?
Before extinction of an electric fire we need:
To know the voltage and wear rubber gloves.
To confine the area involved in the fire.
To disconnect the power source.
To put out the fire without taking any special measures.
What do you call the wide rung on a pilot ladder that prevents the ladder from twisting?
The wide rung on a pilot ladder that prevents it from twisting is called a “Spreader”.
The wide rung on a pilot ladder that prevents it from twisting is called a “Long rung”.
The wide rung on a pilot ladder that prevents it from twisting is called a “Ani-twist rung”.
The wide rung on a pilot ladder that prevents it from twisting is called a “Wide step”.
On a RoRo vessel, which of these stowage situations produces high friction that does not allow movemement of the cargo?
Vehicles in direct contact with steel decks.
Two tiers of dunnage placed between vehicles and steel decks.
A single tier of dunnage placed between vehicles and steel decks.
Steel plates placed between vehicles and steel decks.
When keeping a lookout, what would be the correct understanding of the question “What is the aspect of the other ship”?
The question is requesting some indication of what lights or part of the vessel is seen.
The question is requesting where on the horizon the other ship was sighted.
The question is requesting some idea of how far away the other ship is from your own ship.
The question wants to know what type of ship has been sighted.
For which of the following groups of substances or materials is the use of water as an extinguishing agent dangerous?
Sodium hydrosulphite, potassium hydroxide, magnesium.
Gas-oil, oily rags, synthetic textiles.
For how long should a tank be ventilated when people are working inside?
Until the tank is gas free.
For as long as people are working in the tank.
For as long as it is deemed necessary by the Chief Officer.
In the human body, breathing is controlled by:
The respiratory centre in the brain.
If conditions permit, which is the best way to board a liferaft which is floating close to the ship?
Use a rope ladder close to the raft to climb down and board.
Wearing a lifejacket, jump into the water close to the raft and then swim to it.
Jump onto the raft itself.
Jump into the water close to the raft, without lifejacket, as this will make it easier to swim and board the liferaft.
Give the meaning of the following symbol:
Secondary means of escape.
Which of the following is false when a casualty is bleeding?
Cover the wound with a cloth.
Encourage patient to lie quite and re-assure.
What safety clothing should be worn during an anchoring operation?
All of the equipment mentioned in the alternative answers.
Boiler suit, working gloves.
Safety helmet, safety shoes.
On a RoRo vessel, why are short lashings better than long lashings for ro-ro units?
Because they’re easily tightened and tensioned.
Because it is a cargo securing manual requirement.
Because ship’s vibrations will not slacken short lashings.
On a RoRo vessel, what should be done if the surface of the loading ramp is oily?
Immediately clean the oil-affected area(s).
Wash the oil-affected area(s) using a fire hose.
Allow cargo operations to continue in the usual manner.
On a RoRo vessel, what should be done if cracks are found on portable deck supports?
Stop cargo operations on that deck and inform the master.
Disallow vehicles from passing over the portable deck and tell no one why.
How should you, as helmsman, give feedback to the OOW (officer on watch) that his orders are understood?
You don’t have to give any feedback.
Water is the extinguishing agent which is the most widely employed and its action as an extinguishing agent is due to a combination of the following phenomena:
Cooling, smothering and dispersion.
Smothering and dispersion.
Cooling, inhibition and dispersion.
Smothering and inhibition.
Noise level called “the injurious area” starts at:
What is a deck lift vehicle?
As detailed in the instructions provided by the manufacturer or shipper.
Pass lashings over the body of the vehicles.
Pass lashings over the body of the vehicles.
Secure the front and rear bumpers.
What is a mooring line used for?
A mooring line is a thick wire or synthetic rope used to moor the ship.
A mooring line is a small diameter line attached to a large diameter rope.
A mooring line is a line that is passed through a block ashore.
A mooring line is a line thrown ashore when a vessel ties up.
What is the greatest interest of the “help” position?
It lessens the survivor’s fatigue.
It lessens the survivor’s heat escape.
It lessens the survivor’s stress.
It prevents the survivor’s blood from collecting in the lower part of his body.
Give the meaning of the following symbol:
C class fire door self closing.
A class fire door self closing.
B class fire door self closing.
D class fire door self closing.
What is the main fixed fire-fighting system on a car deck?
Is it allowed to have animals on the car deck during a voyage?
Only if the weather conditions permit.
Yes, if they are safely placed in a suitable vehicle.
It is up to the captain to decide.
What do you understand by the order: “Move the pilot ladder to the other side”?
To change the position of the pilot ladder from the main deck to the fore deck.
To rig another pilot ladder.
To shift the pilot ladder to the opposite side of the ship.
To move the pilot ladder further along nearer to the bow.
Where and for what are rubber mats used on board a pure RoRo car carrier?
Under the loading ramp flap to prevent vehicle damage.
Under the loading ramp flap to prevent jetty damage.
Under the loading ramp flap to prevent ramp damage.
Under the loading ramp flap to prevent jetty damage.
Which publication should be consulted for details on the separation of Dangerous cargos on RoRo vessels?
The Cargo Securing Manual.
During the loading of cars and vans on a RoRo vessel, what must be verified by the vessels crew when the vehicle is in its stowage position.
All of the following answers.
Any damage has been reported to the duty officer or stevedore depending on your company procedures.
During a bomb search, which of the following is an important principle to follow?
Do not touch any suspicious packages.
Throw any suspicious items overboard.
Try to reach behind bulkheads to find a bomb.
Know exactly what a bomb looks like.
On a RoRo vessel, what danger is associated with loaded container tractors passing over large fittings on the loading ramp or on the vessel’s decks?
The container jumping the trailer.
Damage to the trailer tyres.
Damage to the container cargo.
Damage to the ship’s fittings.
What does the cargo capacity of a RoRo car carrier depend upon?
The size of vehicles for which it is designed.
The volume of vehicles to be loaded.
The weight of vehicles it can carry.
The number of vehicles it can carry.
On a RoRo vessel, what should be used to secure cars with aluminium tyre rims?
Wooden wheel chocks only.
8 mm diameter steel wire rope.
On a RoRo vessel, to what should a heavy vehicle be secured on a car deck?
In order to extinguish a flammable liquid of the same kind as alcohol, we can use:
Give the meaning of the following symbol:
Area protected by sprinkler.
“Overshoot” is an expression related to a ship’s steering ability. What is the correct understanding of this expression?
It is the way a ship turns when putting the helm in a hard over position.
It is the amount a ship moves forward after the engines are stopped.
It is the way a ship continues to turn when the helm is put amidships.
It is how many degrees of the compass a ship continues to turn after applying counter-rudder.
On a RoRo vessel, when loading Double Stacked containers on Maffi trailers how many twist locks should have used between the 2 containers?
One at each end 2 in total.
One on every corner 4 in total.
Three in total 2 at the door end 1 at the opposite end.
The wearer of a lifejacket can jump into the water without injury and without damaging the jacket from a height of at least:
In the fire fighting of fires of a type C with dry chemical powder extinguishers, the application is performed:
In a continuous way so that the powder spray is in the same direction as the one of the flame.
As soon as possible, to any point of the fire and in intermittent manner.
The chemical powder doesn’t extinguish type C fires.
Across the flame, sweeping it.
On a RoRo vessel, what is a low-bed RoRo unit that is towed onto a ship called?
Which is the “Windlass”, in the figure?
The Windlass is indicated by “B”, in the figure.
The Windlass is indicated by “C”, in the figure.
The Windlass is indicated by “D”, in the figure.
The Windlass is indicated by “A”, in the figure.
Port State Control Officers are authorised to:
Sign oil record book entries.
Regularly inspect ships known to meet the requirement.
Detain ships that are not meeting the requirements for a minimum of 30 days.
Inspect and detain ship that are not meeting the requirements until they are able to demonstrate compliance with the regulations.
With regard to the characteristics of a mafi trailer what must be ensured prior to unfastening this unit on board?
That after unfastening it will not move.
That cargo on the trailer is not damaged.
That the cargo details have been checked.
That there is sufficient room for it to be driven away.
What is the main responsibility of a bridge lookout at night?
Inform the bridge of any new lights when they appear over the horizon or any other items observed which may affect the ship.
A Inform bridge of changing weather patterns.
Inform bridge of any lights when they appear over the horizon.
Inform bridge of any other ships observed, which appear to be getting closer to your own ship.
When mustered to an abandon ship drill, what is the first thing you do when entering the muster station?
Wait for the order to put on your life jacket.
On a RoRo vessel, which is the correct method of securing a lashing belt to a vehicle?
By means of a hook facing away from the deck.
By means of a hook facing the deck.
Apart from steering the helmsman should also:
Regularly check the gyro against the magnetic compass.
Regularly check the speed.
Normally ventilation fans in enclosed RoRo spaces must be run continuously whenever vehicles are on board. Why?
An increased number of air changes may be required when vehicles are being loaded or unloaded, or where flammable gases or liquids are stowed in closed RoRo spaces.
The manufacturer of the fans recommends continuous operation to reduce maintenance cost.
It is better to run the fans continuously instead of testing the atmosphere.
It is easier for the crew, they don’t have to think about starting and stopping of fans.
If you have to carry out hot work close to a smoke detector in the engine room, what precautions should be taken?
No special precautions except for having a watch man and a fire extinguisher available.
Disconnect the smoke detector.
Notify Master, Deck officer and Engineer in charge.The loop for this special sensor to be switched off and take normal precautions for hot work.
Notify the deck officer in charge that a fire alarm may occur.
During RoRo cargo operations, what must be monitored at all times where the ramps are concerned to prevent damage to the cargo.
The controls are left unsecured at all times.
The ramp is correctly painted.
The angle of the loading ramp is not to steep and that the ramp has not lifted of the jetty.
What is the meaning of the term “Steady as she goes” when acting as helmsman?
It means the helmsman has to try and keep the vessel heading as it is.
Keep the applied rudder constant until the next helm order.
Reduce the number of helm movements used when steering a set course.
It means keep the rudder amidships until another order is given.
What material should boiler suits be made of?
During restricted visibility, you are posted as bridge lookout and you hear 1 long blast at intervals of about 2 minutes on your port bow. What will you report to the OOW (officer on watch)?
Power driven vessel under way and making way on the port bow.
A vessel at anchor on port bow.
Fog signal of one long blast heard on the port bow.
Power-driven vessel making no way on port bow.
On a RoRo vessel, to what should a heavy vehicle be secured on a car deck?
What is understood by the word “Bollard”, when mooring a ship?
A Bollard is a loop in a rope.
A Bollard is a rope made up of several strands.
A Bollard is a very heavy rope.
A Bollard is a thick steel post to which mooring lines are secured.
On a RoRo vessel, what must you ensure where the cap of a sounding pipe is flush with a ro-ro deck?
Prohibit all cargo stowage around this area.
Prohibit the stowage of wheeled cargo around the area.
Prohibit the storage of general cargo around the area.
Sufficient vertical clearances between the sounding pipe cap and cargo lashings.
For what could a ro-ro vessel be held responsible by a port authority?
Ramp damage to the jetty.
Stevedore damages to vehicles.
Visitors not wearing appropriate identification.
An alarm signal consisting of seven short blast followed by one prolonged blast is sounded by the ship’s whistle and alarm bells. What are you to do?
Go to your lifeboat station.
A Report on the bridge (deck crew) or engine room (engine crew) for further orders.
Go to (or remain in) your cabin and await further orders.
What is the correct understanding of the term “gangway”?
Portable bridge arrangement between ship and shore, when alongside.
The access arrangements on an oil tanker between the bow and the after accommodation.
The ladder arrangement to allow walking access down the ship’s side into a boat alongside the vessel.
The access arrangements between the decks on the ship.
What is the flash point of an oil or liquefied gas?
The flash point for an oil or liquefied gas is the temperature at which it is possible to ignite the vapour above the liquid.
The flash point is the temperature needed to have a oil or liquefied gas pumpable.
The flash point is the temperature the oil or liquefied gas need for self ignition.
The flash point is the mixture of oxygen and hydro carbons needed to have an oil or liquefied gas to burn.
How would an enclosed space be defined?
One in which the atmosphere may have a deficiency of oxygen or may have a toxic gas.
One which has not be ventilated for some time.
On a RoRo vessel, which of the following is not designed to hold chain lashings?
Clover leaf lashing sockets.
On a RoRo vessel, what should a duty crew member do immediately upon observing funnel soot emissions?
Inform the Chief Officer.
Inform the duty engineer.
Which is the “Windlass”, in the figure?
The Windlass is indicated by “B”, in the figure.
The Windlass is indicated by “C”, in the figure.
The Windlass is indicated by “D”, in the figure.
The Windlass is indicated by “A”, in the figure.
Welding and flame cutting are among the factors which give the highest risk of fire on board ships. Precaution has to be taken to avoid this risk. Which of the following safety rules may be regarded as the most important?
Electric welding plants shall be controlled by a responsible engineer before use.
The welder shall have been instructed in the use of the ships welding plant.
Only holders of welding certificates shall be allowed to carry out welding on board ships.
Only use electrodes from a well-known manufacturer.
On the diagram provided, there are four (4) possible directions indicating the term “AHEAD”. Which one is the correct?
Ahead is indicated by “A”, in the figure.
Ahead is indicated by “B”, in the figure.
Ahead is indicated by “C”, in the figure.
Ahead is indicated by “D”, in the figure.
Which of the following are frequent causes of fires in accommodation?
Covering of electric equipment with blankets.
Overloading electric plugs.
On a RoRo vessel, why should there be no more than two lashings secured to any one point on a ro-ro unit?
Because the vehicle securing point is likely to break in heavy weather.
Because the securing forces will not be evenly distributed.
Because the vehicle itself is likely to tip over during heavy weather.
Because the securing forces will not be evenly distributed.
To what should you pay very close attention, when inspecting portable car decks?
Cracks in way of deck supports.
Abrasions over the deck surface.
General condition of the portable deck.
Safety markings on the portable deck.