Le test comprend 80 questions aléatoires.
Total de questions sur ce sujet : 132
If you detect a fire on board the ship, dependent on the situation, which of the following actions is the first to be taken?
Try to kill the fire immediately by use of fire-extinguishers or other adequate appliances.
Call the officer on duty.
Check all nearby compartments for survivors.
What is understood by the term “take the helm”?
Change the place where the lookout is standing.
Take over the steering of the ship.
Take over heaving of a rope.
Take a message to another officer.
In order to extinguish a flammable liquid of the same kind as alcohol, we can use:
What should the gangway watchman always ensure is available for visitors at the top of the gangway?
Safety and security information.
Notice board giving name of ship and company.
Notice board stating the sailing time of the ship.
The location of useful places to visit ashore.
Give the meaning of the following symbol:
What is the meaning of the term “Steady as she goes” when acting as helmsman?
It means the helmsman has to try and keep the vessel heading as it is.
Keep the applied rudder constant until the next helm order.
Reduce the number of helm movements used when steering a set course.
It means keep the rudder amidships until another order is given.
An inflatable lifejacket will inflate:
Either automatically on immersion or by a single manual motion.
Automatically on immersion.
Either automatically on immersion or by mouth.
Either automatically on immersion or by a single manual motion or by mouth.
On a RoRo vessel, which of the following is not designed to hold chain lashings?
Clover leaf lashing sockets.
When mustered to an abandon ship drill, what is the first thing you do when entering the muster station?
Wait for the order to put on your life jacket.
What does the term “Hard a Starboard” or “Hard to Starboard” mean?
Put the wheel fully over to starboard.
The wheel is difficult to turn to starboard.
Do not allow the vessel to swing to starboard.
Start the ship swinging to starboard.
On a RoRo vessel, what is important with regard to a loading ramp resting on a jetty?
It must not foul the ship’s mooring ropes.
Visitors must not be allowed access to the vessel via the ramp.
The ramp’s position must be maintained.
The position of mats between the ramp flap and jetty must be maintained at all times.
Which is the “Windlass”, in the figure?
The Windlass is indicated by “B”, in the figure.
The Windlass is indicated by “C”, in the figure.
The Windlass is indicated by “D”, in the figure.
The Windlass is indicated by “A”, in the figure.
What is the main responsibility of a bridge lookout at night?
Inform the bridge of any new lights when they appear over the horizon or any other items observed which may affect the ship.
A Inform bridge of changing weather patterns.
Inform bridge of any lights when they appear over the horizon.
Inform bridge of any other ships observed, which appear to be getting closer to your own ship.
What does the cargo capacity of a RoRo car carrier depend upon?
The size of vehicles for which it is designed.
The volume of vehicles to be loaded.
The weight of vehicles it can carry.
The number of vehicles it can carry.
When patrolling the car deck during a voyage you should observe the following elements:
Any abnormalities such as leakages, fumes, smoke or fire. Check if the lashings need to be tightened on lashed cargo.
Check that fire hoses are connected to the fire hydrants.
Check if all the lights are switched off and the doors are closed.
On a RoRo vessel, what is lashing equipment used for?
To prevent the cargo from shifting during the voyage.
To stop cargo from being stolen.
Adding additional weight to the cargo.
To stop cargo from being stolen.
Prior to entering a cargo hold to check the cargo condition stowed in it, you must ensure that:
The necessary permits, based on valid atmospheric and other applicable tests, are issued and valid for entry.
Emergency equipment at the after end of the main deck is in place.
A list of the items stowed in the applicable hold, extracted from the Cargo manifest, must be available for reference during the checks.
Written instructions from the Chief Officer on what to check in the holdare signed by all persons entering the space.
On a RoRo vessel, to what should a heavy vehicle be secured on a car deck?
On a RoRo vessel, which of the following can cause an unplanned list at sea?
An alarm signal consisting of seven short blast followed by one prolonged blast is sounded by the ship’s whistle and alarm bells. What are you to do?
Go to your lifeboat station.
A Report on the bridge (deck crew) or engine room (engine crew) for further orders.
Go to (or remain in) your cabin and await further orders.
Noise level called “the injurious area” starts at:
Car decks on board RoRo passenger ships are normally closed during sea passage. Why are passengers not allowed to be on the car-deck during sailing?
To prevent burglary and damage to cars.
If the car decks are empty, it will be easier for the crew to locate all passengers in case of an emergency.
Vehicles and other cargo can shift when the ship is rolling. Persons may be trapped between vehicles or cargo.
In case of an emergency situation it can be difficult for passengers to escape. Vehicles, lorries, trailers and other cargo are maybe lashed and it is a substantial chance for passengers to get injured. Vehicles and other cargo might also shift when the ship is rolling.
The wearer of a lifejacket can jump into the water without injury and without damaging the jacket from a height of at least:
Give the meaning of the following symbol:
C class fire door self closing.
A class fire door self closing.
B class fire door self closing.
D class fire door self closing.
Why are all RoRo passenger ships divided into vertical “zones”?
Vertical zones are fire zones which can be divided from each other with fire doors. In case of fire, all fire doors in front and aft of the fire will be closed to prevent spreading of smoke/fire.
Vertical zones are separated with fire doors which will be closed automatically when the fire alarm start.
All vertical zones are separated with watertight doors, which will be closed in the case of a grounding, etc.
There is one fire team in each zone.
An evacuation-slide must be capable:
Of being deployed by one person.
Of being deployed by one person or remotely controlled from the bridge.
Of being deployed by two persons.
Where and for what are rubber mats used on board a pure RoRo car carrier?
Under the loading ramp flap to prevent vehicle damage.
Under the loading ramp flap to prevent jetty damage.
Under the loading ramp flap to prevent ramp damage.
Under the loading ramp flap to prevent jetty damage.
A road trailer is marked as follows: SWL 70t; Tare wt. 6t. What is the gross weight of the trailer when carrying it maximum payload?
What is the main characteristic of the weak link in a float-free arrangement for inflatable liferafts?
Be of sufficient strength to permit to pull the painter from the container and the inflation of the liferaft.
Be of sufficient strength to break at a depth of at least 4 m and release the liferaft from its berth.
Be of such a strength to be cut by any person with a jack-knife.
Be of sufficient strength to keep the liferaft alongside the ship when dragged at a maximum speed of 3 knots.
How many buoyant smoke signals are carried in each liferaft with SOLAS A pack?
On the diagram provided, there are four (4) possible directions indicating the term “AHEAD”. Which one is the correct?
Ahead is indicated by “A”, in the figure.
Ahead is indicated by “B”, in the figure.
Ahead is indicated by “C”, in the figure.
Ahead is indicated by “D”, in the figure.
What is the meaning of the abbreviation “SWL” as stamped on lifting gear around the ship?
Welding and flame cutting are among the factors which give the highest risk of fire on board ships. Precaution has to be taken to avoid this risk. Which of the following safety rules may be regarded as the most important?
Electric welding plants shall be controlled by a responsible engineer before use.
The welder shall have been instructed in the use of the ships welding plant.
Only holders of welding certificates shall be allowed to carry out welding on board ships.
Only use electrodes from a well-known manufacturer.
For what could a ro-ro vessel be held responsible by a port authority?
Ramp damage to the jetty.
Stevedore damages to vehicles.
Visitors not wearing appropriate identification.
On a RoRo vessel, what must you ensure where the cap of a sounding pipe is flush with a ro-ro deck?
Prohibit all cargo stowage around this area.
Prohibit the stowage of wheeled cargo around the area.
Prohibit the storage of general cargo around the area.
Sufficient vertical clearances between the sounding pipe cap and cargo lashings.
“Overshoot” is an expression related to a ship’s steering ability. What is the correct understanding of this expression?
It is the way a ship turns when putting the helm in a hard over position.
It is the amount a ship moves forward after the engines are stopped.
It is the way a ship continues to turn when the helm is put amidships.
It is how many degrees of the compass a ship continues to turn after applying counter-rudder.
On a RoRo vessel, what should be done if the surface of the loading ramp is oily?
Immediately clean the oil-affected area(s).
Wash the oil-affected area(s) using a fire hose.
Allow cargo operations to continue in the usual manner.
Which of the following are frequent causes of fires in accommodation?
Covering of electric equipment with blankets.
Overloading electric plugs.
What is the correct action if the OOW (officer on watch) gives the helmsman the order to: Change over from Automatic pilot to Hand steering?
Start following the order from the OOW using the manual control.
Report to the OOW that manual steering is active.
Check that the wheel or tiller is amidships, then switch over the control to “manual”.
All of the answer options are correct.
On a RoRo vessel, which is the correct method of securing a lashing belt to a vehicle?
By means of a hook facing away from the deck.
By means of a hook facing the deck.
During a bomb search, which of the following is an important principle to follow?
Do not touch any suspicious packages.
Throw any suspicious items overboard.
Try to reach behind bulkheads to find a bomb.
Know exactly what a bomb looks like.
On a RoRo vessel, what additional securing arrangements should be used when loading a vehicle on an incline or fixed ramp.
The vehicle should also be chocking under its wheels.
Double the normal lashings should be used.
Double the normal lashings should be used.
If you have to carry out hot work close to a smoke detector in the engine room, what precautions should be taken?
No special precautions except for having a watch man and a fire extinguisher available.
Disconnect the smoke detector.
Notify Master, Deck officer and Engineer in charge.The loop for this special sensor to be switched off and take normal precautions for hot work.
Notify the deck officer in charge that a fire alarm may occur.
What is a deck lift vehicle?
As detailed in the instructions provided by the manufacturer or shipper.
Pass lashings over the body of the vehicles.
Pass lashings over the body of the vehicles.
Secure the front and rear bumpers.
What will you do when all the fresh water in the survival craft is finished or about to finish?
Start collecting rain water.
Drink only 1 liter of sea water per day.
Use sea water to keep your body wet.
Once a non dangerous cargo unit has been stowed on board a RoRo vessel, what should duty crew members ensure?
That there is no sign of tampering with internal accessories.
That there is no sign of tampering with internal accessories.
That the duty officer is notified of the vehicle’s position.
That the vehicle is lashed immediately.
When fighting fire, why shall you never pour water into hot fat?
The water will explode into steam causing hot fat to be thrown far away thus possibly causing severe burns or fire.
The fat will not be edible any more.
The water will turn into steam and cause the fat to explode.
The fat will stiffen immediately and need reheating.
On a RoRo vessel, what should be used to secure cars with aluminium tyre rims?
Wooden wheel chocks only.
8 mm diameter steel wire rope.
How should you, as helmsman, give feedback to the OOW (officer on watch) that his orders are understood?
You don’t have to give any feedback.
Apart from steering the helmsman should also:
Regularly check the gyro against the magnetic compass.
Regularly check the speed.
With regard to the characteristics of a mafi trailer what must be ensured prior to unfastening this unit on board?
That after unfastening it will not move.
That cargo on the trailer is not damaged.
That the cargo details have been checked.
That there is sufficient room for it to be driven away.
What safety clothing should be worn during an anchoring operation?
All of the equipment mentioned in the alternative answers.
Boiler suit, working gloves.
Safety helmet, safety shoes.
Normally ventilation fans in enclosed RoRo spaces must be run continuously whenever vehicles are on board. Why?
An increased number of air changes may be required when vehicles are being loaded or unloaded, or where flammable gases or liquids are stowed in closed RoRo spaces.
It is better to run the fans continuously instead of testing the atmosphere.
The manufacturer of the fans recommends continuous operation to reduce maintenance cost.
It is easier for the crew, they don’t have to think about starting and stopping of fans.
When acting as helmsman, what should be the method of responding to an order?
When receiving an order, the order should be repeated back to the person who gave it.
The order needs to be acted upon and this will indicate you understood what was said.
When acting as wheelman and given a helm order you should always say “Yes sir”.
The response to an order should be to acknowledge that order and then carry out what you were told to do.
Give the meaning of the following symbol:
Area protected by sprinkler.
On a RoRo vessel, why is it necessary to maintain safety markings/luminous paint on pillars in ro-ro decks?
Because it is a port state control requirement.
To comply with the ship’s Planned Maintenance Schedule.
To comply with the company’s standing instructions.
To prevent damage during cargo operations.
On the figure there are four (4) possible definitions of the term “BREADTH” given. Which one is the correct one?
Breadth is defined as “A” on the figure.
Breadth is defined as “B” on the figure.
Breadth is defined as “C” on the figure.
Breadth is defined as “D” on the figure.
What might safely be used to prevent a load swinging when lifted by a crane?
Short, jerky movements on the ship’s controls.
Personnel underneath the load, holding onto it and restricted its movement.
Guide or tag lines, tended from a safe location.
The general background colour to be used on warning signs that indicate emergency or first-aid features, or indicate a safe condition would be:
If conditions permit, which is the best way to board a liferaft which is floating close to the ship?
Use a rope ladder close to the raft to climb down and board.
Wearing a lifejacket, jump into the water close to the raft and then swim to it.
Jump onto the raft itself.
Jump into the water close to the raft, without lifejacket, as this will make it easier to swim and board the liferaft.
What is the greatest interest of the “help” position?
It lessens the survivor’s fatigue.
It lessens the survivor’s heat escape.
It lessens the survivor’s stress.
It prevents the survivor’s blood from collecting in the lower part of his body.
Which one of these ropes is very slippery, sinks in water and very stretchy when under tension?
What do you understand by: “Rig the accommodation ladder in combination with the pilot ladder”?
Lower the accommodation ladder and rig the pilot ladder right next to it.
Lower the gangway and rig the pilot ladder from the gangway.
Lower the gangway and rig the pilot ladder forward of the accommodation.
How will you act if you are helmsman and the OOW (officer on watch) gives you the order: “Nothing to port”?
Let the ship turn to starboard.
Don’t let the ship turn to port.
Alter course to starboard.
On RoRo passenger ferries, the passengers are not normally allowed to be on the car-deck during sailing. What is the reason for this rule?
In case of an emergency situation, the car deck can be difficulty to find the way around, and cars can shift position caused by ships movement.
The ships movement can make the cars slide/move and a person can be trapped between two cars.
If the car deck are empty, it will be easier for the crew to locate all passengers in case of an emergency.
To prevent damage and burglary to the cars.
What material should boiler suits be made of?
Which of these are indicators that an individual may be a drug smuggler?
The individual wears bulky or out of season clothing.
The individual spends his or her free time hanging out with others.
The individual makes small local purchases.
The individual is disinterested in the ship’s cargo.
On a RoRo vessel, why is it considered good practice to have a duty crew member standing by the loading ramp?
To supervise the stevedores.
To supervise the rate of loading.
To record the nature and extent of any pre-loading damage to cargo.
To guide RoRo units onto the vessel.
On a RoRo vessel, what danger is associated with loaded container tractors passing over large fittings on the loading ramp or on the vessel’s decks?
The container jumping the trailer.
Damage to the trailer tyres.
Damage to the container cargo.
Damage to the ship’s fittings.
When first using cleaning agent in the machinery space, the crew should:
Confirm that it will form an emulsion.
Confirm that it won’t form an emulsion.
Give the meaning of the following symbol:
Secondary means of escape.
On a RoRo vessel, which of the following is not required in the pre-stowage plan?
Checking communications equipment.
The operation of gas-tight and watertight doors.
Stowage and securing of specialised cargoes.
On the figure there are four (4) possible directions shown by the arrowed lines. Which one would correctly shows the direction understood by the term “AFTER SPRING”?
After spring is defined as “A” on the figure.
After spring is defined as “B” on the figure.
After spring is defined as “C” on the figure.
After spring is defined as “D” on the figure.
An airway should be used when:
The patient is breathing on his own but is doing so with great difficulty.
The patient is not breathing or is otherwise unable to maintain a clear passage.
The patient is unconscious.
Patient has injury in the mouth.
On a RoRo vessel, which of these stowage situations produces high friction that does not allow movemement of the cargo?
Vehicles in direct contact with steel decks.
Two tiers of dunnage placed between vehicles and steel decks.
A single tier of dunnage placed between vehicles and steel decks.
Steel plates placed between vehicles and steel decks.
Which is the “Windlass”, in the figure?
The Windlass is indicated by “B”, in the figure.
The Windlass is indicated by “C”, in the figure.
The Windlass is indicated by “D”, in the figure.
The Windlass is indicated by “A”, in the figure.
On a RoRo vessel, what should a duty crew member do immediately upon observing funnel soot emissions?
Inform the Chief Officer.
Inform the duty engineer.
What is important to wear for all officers and crew when working on the RoRo deck during loading and discharging?
In case of an emergency situation it can be difficult for passengers to escape. Vehicles, lorries, trailers and other cargo are maybe lashed and it is a substantial chance for passengers to get injured. Vehicles and other cargo might also shift when the ship is rolling.
If the car decks are empty, it will be easier for the crew to locate all passengers in case of an emergency.
To prevent burglary and damage to cars.
Vehicles and other cargo can shift when the ship is rolling. Persons may be trapped between vehicles or cargo.
When keeping a lookout, what would be the correct understanding of the question “What is the aspect of the other ship”?
The question is requesting some indication of what lights or part of the vessel is seen.
The question is requesting where on the horizon the other ship was sighted.
The question is requesting some idea of how far away the other ship is from your own ship.
The question wants to know what type of ship has been sighted.
What is the normal term used for the regular training of how to launch the lifeboat?