Онлайн-тестування: Test about IMSBC Code v5.0

A bulk cargo of iron ore is loaded with a high peak at the centre of the cargo space. What is the most likely result of this form of loading?

A bulk carrier has badly maintained hatch cover seals which allow seawater to leak into the cargo space in bad weather. Which one of the following is considered to be the main danger of this situation when considering a non-liquefying cargo?

A cargo is about to be loaded and the moisture content is found to be in excess of the transportable moisture limit (TML). Which one of the following actions should the Master take?

A cargo is loaded that has a liquefaction problem and moisture content above the transportable moisture limit. Which one of the following effects on the cargo is the most likely result of this situation?

A cargo of coal appears to be self-heating on voyage. Which one of the following actions should the ships Master take in such circumstances?

A cargo of crushed coal, particle size 1 mm and a flow moisture of 20 is to be loaded. The coal had a moisture content of 17 measured 12 days previously, but has lain uncovered on the quayside in heavy rain since. Which one of the following actions should the Master of the vessel take?

A number of deaths have occurred in cargo spaces that have been used for cargoes such as grain and steel scrap (swarf). Which one of following is thought to have been absorbed by the cargo, from the cargo space atmosphere, so causing these deaths?

A vessel is to load 100 000 tonnes of coal with a stowage factor (SF) of 1,50 m3/t. Which one of the following will be the required volumetric cargo space to load this cargo, measuring in cubic metres, m3?

A vessel is to load 100 000 tonnes of iron ore with a stowage factor (SF) of 0,50 m3/t. Which one of the given options is the required stowage volume for this cargo?

A vessel is to load 20 000 tonnes of iron ore with a stowage factor (SF) of 0,30 m3/t. The vessel has four cargo holds each with a volume of 6 000 m3 and a maximum allowed loading of 7 000 tonnes in each hold. Which one of the following statements is correct in relation to the above?

According to the BLU Code, which one of the following has the responsibility for the risk assessment and detailed planning of the cargo loading or unloading operation at a terminal?

According to the Basel Convention, toxic wastes may be loaded only after which THREE of the following steps have been taken?

Cargoes are placed in either Group A, Group B or Group C with respect to the hazard they present. Which one of the following statements is correct in relation to these groups?

In relation to the classes given in the IMSBC Code, is the following statement true or false? Two bulk cargoes, a Class 5.1 dangerous good and a Class 6.2, requiring a category 3 segregation, must have at least 3 metres separating them.

In relation to the groups given in the IMSBC Code, is the following statement true or false? Group C contains a list of materials which are neither liable to liquefy nor to possess chemical hazards.

In which one of the following would you normally find information about the maximum loading weight of each cargo hold?

In which one of the following would you normally find the two common methods of determining the angle of repose?

Is the following statement true or false? A bulk cargo with low angle of repose has a high likelihood of shifting.

Loading of certain cargoes, including grain and iron ore fines, may require approval from the government authorities of the port State. Emergencies with certain cargoes also require the government authorities to be informed. Where, within the IMSBC Code, can contact addresses of the relevant authorities be found?

Select from the following, the phrase that most accurately completes the following statement: the highest segregation for incompatible cargoes carried in packaged form, along with bulk cargoes, is:

Select from the options the phrase, which most accurately completes the following statement: the angle of repose of a cargo is:

Select from the options the phrase which most accurately completes the following statement: the danger associated with carbon monoxide gas is that it is:

Select from the phrases given in the options the one, which most accurately completes the following statement: a bulk carrier with a large metacentric height (GM) will have a:

Select the phrase which most accurately completes the following statement: the main reason for establishing the moisture content is to:

Table 2 of an IMO safety circular in the IMSBC Code supplement exempts vessels dedicated to certain cargoes from Group B from having a fixed gas extinguishing system. Select the two correct statements about these cargoes from the following:

Which of the following is the main reason why high-density cargoes should not be stowed to an excessive height?

Which one of the bulk cargo types given in the options is more likely to have a liquefaction risk?

Which one of the bulk cargoes given in the options is most likely to be subject to liquefaction?

Which one of the following answers is the correct definition for the term “flow moisture point”?

Which one of the following answers is the correct definition for the term “stowage factor”?

Which one of the following answers is the correct definition for the term “transportable moisture content” (TML)?

Which one of the following conditions is likely to occur when a bulk carrier is heavily loaded in the mid-section and lightly loaded at the ends?

Which one of the following does the acronym “MHB” stand for in relation to the IMSBC Code?

Which one of the following groups of gases should the atmosphere of an enclosed space, for example a cargo hold, be checked for, before entry is permitted?

Which one of the following hazards may result from the improper weight distribution of solid bulk cargoes?

Which one of the following identifies how a bulk cargo should generally be loaded in order to reduce the likelihood of the cargo shifting when the ship is rolling heavily in bad weather?

Which one of the following identifies the action, that should be taken with bulk cargoes, that may be subject to liquefying?

Which one of the following identifies the main function of the segregation table in the IMSBC Code?

Which one of the following identifies the main gases, that are likely to be produced by a coal cargo?

Which one of the following identifies the three categories of general hazards associated with shipment of solid bulk cargoes?

Which one of the following identifies what is recommended should be monitored on a bulk carrier, that is carrying a cargo of coal?

Which one of the following is considered to be the main danger to a bulk carrier in relation to seawater leakage into a cargo space?

Which one of the following is the likely to outcome of a cargo hold bilge sounding pipe being damaged, within the cargo hold, during loading?

Which one of the following is the main hazard that may result due to a solid bulk cargo shifting during carriage?

Which one of the following is the main hazard that may result from a chemical reaction during carriage of some types of solid bulk cargo?

Which one of the following is the main reason that water should not be used to extinguish fire in the cargo hold while at sea?

Which one of the following is the main reason why bulk cargo should be trimmed level, or nearly level?

Which one of the following is the main reason why it is important to normally only ballast one or two tanks at a time?

Which one of the following is the main reason why samples and tests of a stockpile of the cargo must be taken within 7 days prior to loading?

Which one of the following is the minimum oxygen content that is required before entry into any enclosed space, such as a cargo hold, should be allowed?

Which one of the following is the most likely result of moisture migration in a bulk cargo?

Which one of the following most accurately describes when personnel may enter a cargo hold, that contains timber and forest products?

Which one of the following possibilities does a high level of carbon monoxide (above 30 ppm) in a coal cargo indicate that the cargo is doing?

Which one of the following procedures should be followed when a bulk cargo of coal is being carried at sea?

Which one of the following should a vessel carrying a coal cargo monitor very regularly?

Which one of the following statements is correct in relation to high density cargoes?

Which one of the following statements is the most accurate with regard to actions to be carried out before entry into an enclosed space, such as cargo space, is made:

Which one of the following statements is the most likely to be true, in relation to a cargo with a high angle of repose of 45°?

Which one of the following statements is the most likely to be true, in relation to a cargo with a high angle of repose of 32°?

Which one of the following statements most accurately describes the term “moisture migration”?

Which one of the following terms is the acronym “TML” used for in the IMSBC Code?

Which one of the following will be the likely result of a bulk carrier being loaded with a high-density cargo such as iron ore?

Which one of the individuals identified in the options is, by the definition given in the BLU Manual, effectively the Master of the ship while cargo is being transferred at a terminal?

Which one of the locations given in the options is the best for taking gas samples from the cargo spaces?

Which three of the following are the IMSBC Code requirements from shore and terminal operators, regarding cargoes with high potential security implications?

Which two of the following apply to a vessel carrying a coal cargo when at sea?

You are to load a full cargo of substance X for which there is no mention of angle of repose in the cargo information form provided by the Shipper. Which appendix of the IMSBC Code will you consult, in addition to appendix 1, to confirm that substance X is cohesive when dry and may be loaded without the risk of dry-shift of the cargo?

You have just received orders to pick up a full load of POTASH, a cargo that you are not familiar with, from a nearby terminal. In which part of the IMSBC Code will you find a description of critical characteristics and hazards and precautions of handling this cargo, before detailed information is made available to you by your company or the terminal?

Your vessel is to load a cargo of iron ore fines during rainy weather. Your ship-owners have asked that you witness testing for moisture content and transportable moisture limit of the consignment prior to loading the cargo since the on-board test with can will be insufficient. Where in the IMSBC Code will you find the correct procedure for the flow table test for moisture content?