Тест состоит из 80 случайных вопросов.
Всего вопросов по данной теме: 132
A vessel has been in involved in a collision. Which procedure should happen immediately?
Communicate with the other ship.
There is assessment of the damage stability.
Determine is there is any evidence of pollution.
Determine any injuries of persons on board.
The number of frequencies on which a MF/HF-DSC distress alert multi-frequency call attempt can be transmitted is:
Your vessel is proceeding along a narrow channel in front of another one. You hear this signal from the vessel behind you. What does it mean?
I intend to overtake you on your starboard side.
I am operating astern propulsion.
I intend to overtake you on your starboard side.
I am faster than you. Get out of the way.
Which organization verifies the computational results and stored ship data used by the stability program loaded on a vessel’s computer?
The Classification Society.
The engineer attending the installation and initial on-site testing.
Port State Control Officers are authorised to:
Detain ships that are not meeting the requirements for a minimum of 30 days.
Regularly inspect ships known to meet the requirement.
Sign oil record book entries.
Inspect and detain ship that are not meeting the requirements until they are able to demonstrate compliance with the regulations.
For guidance on lashing arrangement of containers on-board the vessel, the most important document to refer is:
The Code for the Safe Practice for Cargo Stowage and Securing.
The Cargo Securing Manual.
The company’s ISM handbook.
On a Container vessel, duty crew members must supervise the lashing of containers, because:
It is an international requirement under the ISM Code.
Because of local port regulations.
Stevedores often apply container lashings haphazardly or place twistlocks incorrectly.
Because of time constraints on the vessel towards the end of cargo operations.
A typical hazard associated with the carriage of ammonium nitrate is:
The most effective method of dealing with an under-deck cargo space fire on board a container ship, is to:
Deploy the fixed firefighting system.
Boundary cool the cargo hold from the deck.
Tackle the fire locally with fire hoses.
Turn the vessel off the wind to reduce the relative wind strength.
The transmitting power of the VHF is adjusted by setting:
Which Security Levels requires the highest security alert?
On a Container vessel, containers with untreated fishmeal cargo are carried:
Separated from class 4.2 containers.
On deck away from sunlight.
Which one of the following types of rope is the most dangerous to work with?
Which of the following information shall be specified by the muster list?
The specific duties assigned to passengers that are in charge of a group of others.
Action to be taken by crew and passengers.
The abandon ship signal consisting of two long blasts.
The muster list has been prepared and approved by the administration before the ship proceeds to sea.
What are the main components of the atmospherical air?
O2: 50 %, N2: 50 %, H2O: traces CO2: traces, Rare gases: traces.
O2: 21 %, N2: 78 %, H2O: traces CO2: traces, Rare gases: traces.
O2: 21 %, N2: 72 %, H2O: 5 % CO2: 2 %, Rare gases: traces.
O2: 75 %, N2: 10 %, H2O: 5 % CO2: 5 %, Rare gases: traces.
It is the Master’s responsibility to ensure that:
Concerned personnel carry out the on-board training programme effectively.
All information regarding the onboard training is given to the ship manager.
Safety equipment is not used during the training.
Life jackets are worn during every training.
What is the purpose of the “SQUELCH” on a VHF transmitter/receiver?
Reduce the “noise” in the background.
Increase the sound signal of the receiver.
Switch to another channel.
Increase the range of the transmitter.
What will you do if you are helmsman and the OOW (officer on watch) gives you the order: “Starboard ten”?
Repeat the command back and then turn the wheel to make the rudder turn 10 degrees to starboard of amidships.
Repeat the command back and then allow the vessel to drift 10 degrees to starboard of original course.
Repeat the command back and then put the wheel over sufficiently for the ship to swing at a rate of 10 degrees per minute to starboard.
Repeat the command back and then change course 10 degrees to starboard of present course.
How much food per person is supplied on a liferaft?
None, only barley sugar sweets supplied.
What must be done as soon as reefer containers have been loaded?
They must be connected to the ship’s power supply and their setting temperatures verified.
Their setting temperatures must be verified.
Their stowage positions must be reported to the duty officer.
They must be connected to the ship’s power supply.
What alarm signal must be sounded by the alarm bells in case of fire?
The signal which is stated in the muster list.
One long blast followed by 7 short blasts.
If drugs or suspected drugs are found onboard your ship, follow the five C’s: Confirm, Clear, Cordon, Control and:
Besides normal loads, the lashings of the containers stowed at the outboard part of the deck stow are additionally subjected to:
The effect of wind on the containers.
Transverse accelerating load condition, leading to loss of GM.
The effect of green seas breaking over the containers.
Lack of support from adjacent columns of containers.
What general background colour is used on warning signs that indicate emergency or first-aid features, or indicate a safe condition?
A person wearing an adult lifejacket shall be able:
To dive half a meter under the water surface.
To jump from any height into the water without being injured or damaging the lifejacket.
To swim a short distance through the water and board a survival craft.
To swim half a mile distance and board a survival craft.
The responsibility for safety and security rests with everybody on board the vessel. General house-keeping rules should be followed. Which of the listed rules is the most important?
Keep your working area clean and tidy.
Always use gloves when using grinding machines.
Keep tools within easy reach during work.
Do not carry lighters or matches when working outdoors.
The most appropriate measure to reduce the build-up of ice on containers during a sea passage is to:
Reduce speed, whilst maintaining course.
Increase speed, whilst maintaining course.
Have the crew remove the ice.
Heave to and wait for ambient temperature to rise to safe levels.
A vessel has lost several containers overboard during a voyage. Upon arrival into port, she is being inspected by the attending surveyors. The most important item to be checked during this inspection would be:
Certificates of approval related to lashing equipment used to secure those containers.
The vessel’s Class certificate.
The on-board cargo lashing inventory.
The vessel’s Safety Construction certificate.
For a ships loading computer to be safely used for loading planning and stress calculations, it must be approved by:
A Classification Society.
IT Department of Ship owner.
The Port State where vessel is currently loading.
Hull and Machinery Insures of the vessel.
You are a Senior Officer of the Watch on vessel “A” and are passing through the Straits of Gibraltar. The vessel’s speed is 18 knots and your vessel is overtakiing several other vessels, when the visibility reduces down to about 2 nm. What aspects would you consider when establishing a “safe speed” for your vessel?
Deciding safe speed consider: 2 miles visibility; traffic density; manoeuvrability of vessel; effectiveness of navigational equipment (ARPA etc.); state of sea and currents and navigational hazards.
Adjust my track to follow Route 1 or 2 illustrated and reduce speed down to half speed, approximately 8 knots.
Safe speed should be where the vessel can come to a stop within the visible range.
A safe speed is where a vessel can take proper and effective action to avoid collision and be stopped within an appropriate distance.
The figure shows the cross section of a ship floating in water with the hull coloured in red and the seabed below the vessel shaded. On this figure there are four (4) possible definitions of the term “UNDERKEEL CLEARANCE” given. Which one is the correct one?
Underkeel clearance is B.
Underkeel clearance is C.
Underkeel clearance is D.
Underkeel clearance is A.
Breathing apparatuses is an important piece of equipment for being able to fight a fire onboard a vessel. What routine precautions to be observed with regard to use and maintenance of such equipment?
That personnel having a beard are not selected as smoke divers.
That personnel that are appointed as smoke divers, primarily are given a shore based proper basic education and training.
That the equipment always to be kept cleaned, checked and bottles are recharged immediately upon use, and frequently inspected.
All the mentioned alternatives.
What is the main responsibility of a bridge lookout at night?
Inform the bridge of any new lights when they appear over the horizon or any other items observed which may affect the ship.
Inform bridge of changing weather patterns.
Inform bridge of any lights when they appear over the horizon.
Inform bridge of any other ships observed, which appear to be getting closer to your own ship.
On a Container vessel, containers containing marine pollutants are stowed:
In the last container bay on deck.
Anywhere on deck at the extremity of a container stow.
In the foremost container bay on deck.
All heat burns should be:
Cooled as quickly as possible with running cold water for at least 10 minutes.
Covered with Gauze or bandage immediately.
Applied with soothing lotion as soon as possible.
Treated by the doctor only.
The frequency 121,5 MHz is used for:
Code signals concerning requests and general information on medical matters normally consist of:
Letter D plus two other letters.
Letter M plus two other letters.
Letter P plus two other letters.
Letter H plus two other letters.
What does the term “Hard a Starboard” or “Hard to Starboard” mean?
The wheel is difficult to turn to starboard.
Do not allow the vessel to swing to port.
Start the ship swinging to starboard.
Put the wheel fully over to starboard.
How are ship’s stability characteristics affected by Parametric Rolling?
By the constant change of underwater hull geometry as waves travel past the ship.
By the development of a negative GM.
By the virtual loss of GM.
By an increase in the angle of pitch.
The term OSHA stands for:
Occupation and Safe Health Association.
Occupation Safety and Health Aids.
Overseas Sea Hazard Association.
Occupational Safety and Health Administration.
How frequently should reports from protection and environmental work be sent to shore based management?
Not mandatory to send reports.
The correct weight of a wrongly declared container may be best indicated by:
Strain gauges fitted to the shore gantry cranes.
The ship’s loading computer.
The tare weight stamped on the container.
By the term “Stand by” the operator of a coast-station means that one should:
Wait until the coast-station calls again.
Switch back to the calling channel.
Give the position of the ship.
Wait on this channel for one hour.
On the figure there are four (4) possible definitions of the term “BOLLARD” given. Which one is correct one?
What does heaving result in?
Vertical accelerations acting along container corner posts.
Shearing of container twistlocks.
Longitudinal accelerations acting on hatch pontoons.
What kind of safety clothing should be worn during a mooring operation?
No particular safety clothes are required.
Safety shoes and boiler suit.
Helmet, safety shoes, gloves and protective clothes.
A drip tray containing oil is on fire. The only fire fighting equipment available is water hose with spray jet/spray nozzle. How, if at all, should you attempt to put out this fire using water?
Water should be applied in a jet to the back of the fire.
Water should be applied to the oil in a single jet only.
Water should not be used on any type of oil fire.
The water can be applied in a fine spray starting from the front in a sweeping motion.
Who is the leader of the lifeboat drill (abandon ship drill)?
The first member of the crew arriving at the survival craft.
The appointed lifeboat commander.
Which of air and water is the fluid that transfers the greatest amount of heat during the same time, given that the fluid is not flowing along the immersed body?
Both are transferring equally.
Air if the temperature of the fluid is 10 °C; water if temperature of the fluid is < 10 °C.
What is usually the effect on G when the ship is damaged below the waterline, with water ingress?
It first rises then lowers.
What must be done if the Oil Discharge Monitoring Equipment (ODME) should fail during a ballast voyage?
All of the mentioned must be performed.
The failure must be repaired.
The failure must be noted in the Oil Record Book.
If the failure cannot be repaired onboard, the ODME must be repaired before the ship commences its next voyage.
When acting as helmsman would you expect the reading of the gyro compass to be the same as the magnetic compass?
They would never be the same.
They would always be within 1 or 2 degrees of each other.
Very seldom would they be the same.
They would always be the same.
Messages sent via Inmarsat C are charged:
On the number of kilobits of information transmitted per block of 1 024 bits.
On the basis of a three minute minimum charge with one minute incremental steps.
On the number of kilobits of information transmitted per block of 256 bits.
On the basis of a six second minimum charge with six second incremental steps.
On the figure there are four (4) possible definitions of the term “WINDLASS” given. Which one is the correct one?
Windlass is given by A on the figure.
Windlass is given by B on the figure.
Windlass is given by C on the figure.
Windlass is given by D on the figure.
What do you understand by “Bitter end”?
Bitter end means: the end link of an anchor cable that is secured within the chain locker.
Bitter end means: the toggled end of a lifeboat painter.
Bitter end means: to the very last moment.
Bitter end means: a foul taste at the end of a meal.
Which of these series of sizes corresponds to the international standard for nozzles?
On a Container vessel, under which IMDG Class is fishmeal normally carried when treated with anti-oxidant?
Class 9 – Miscellaneous dangerous substances and articles.
Class 4.1 – Flammable solid.
Class 4.2 – Flammable solid.
Class 5.1 – Oxidizing substance.
If a coast-station doesn’t answer a call on VHF working channel or doesn’t send a reply signal:
You can repeat your call after 2 minutes.
You can repeat your call immediately when convinced that no other radio traffic is interfered with.
You must call on another working channel.
You must call on distress channel.
Under what convention is the master to ensure that a ship is seaworthy and in a fit state to safely carry a shipper’s cargo?
“Overshoot” is an expression related to a ship’s steering ability. What is the correct understanding of this expression?
It is how many degrees of the compass a ship continues to turn after applying counter-rudder.
It is the way a ship turns when you put the helm in a hard over position.
It is the way a ship shoots forward when you give “kick ahead”.
It is the way a ship continues to turn when the helm is put amidship.
On board they want to have a dial-phone cal via Inmarsat with the Apollogracht. In the guides the following ID’s are found for the Apollogracht: 344320000, 424432010, 424432020, 1300210, 36715. What ID should be chosen:
What type of dynamic forces may cause indent in plating on forecastle deck and main deck in way of pillars inside forecastle?
Pressure forces caused by green water on deck.
Slamming in way of flat bottom forward of light draught.
Forces created by waves on the forecastle.
Impact pressure forces in way of abrupt or flared bow.
On board a container vessel conducting loading operations in United States, you notice an unsafe stevedore working practice. If you do not correct this immediately, it may result in:
The ship will be prosecuted.
The master will be arrested.
The port will lodge a protest against the ship.
The duty officer will be arrested.
What does the term DISCHARGE mean, as used in the Oil Pollution Regulations?
All the other alternatives.
On a Container vessel, a mid-bay guide is positioned:
On the tank top at the ends of 40′ container bays.
Between 20′ container bays on deck.
On the tank top mid-way in 40′ guides to prevent transverse movement of 20′ containers.
At the base of cell guides.
An inspection in the amidships area of the weather deck of a Panamax container vessel has revealed cracks in the hatch coamings. It is extremely important to urgently inspect the:
Longitudinals in the double bottom tanks in the amidships half length of the vessel.
Transverse bulkhead immediately aft of the engine room.
Stiffening in the forepeak tank at approximately water line level.
Transverse bulkhead beneath the bridge front.
Why would a very large container vessel pitch more than a feeder vessel?
Because pitching varies with ship’s length.
Because vessel pitching varies with propeller pitch.
Because container stacks on large container vessels are more exposed to wind forces.
Because very large container vessels are more exposed to open sea conditions.
Who is authorised to operate lifting equipment around the ship?
Those ship’s personnel who have been assessed as competent and are duly authorised to do so by the master as per the procedures as outlined in the ship’s SMS system.
All deck officers and ratings and selected engine room personnel.
Stevedores, manufacturer’s maintenance engineers and senior ratings only.
Deck officers and ratings, engineering officers and ratings, GP crew if applicable, who are in possession of crane operation training certificates issued by the company.
As a result of being in collision with your vessel, the other vessel involved is on fire? What are your responsibilities to it?
The other vessel is in distress and if possible I will render assistance.
You should continue on with the voyage if your damage is not serious.
There is no statutory requirement to provide assistance as the actions of that vessel were the primary cause of the collision.
Your vessel should manoeuvre close to the other vessel and aid the fire fighting operation.
What is the normal name of the waterproof suit shown in the picture?
According to Rule 24 of the International Regulations for Preventing Collisions and the illustrated lights, how long is the tow likely to be?
It is more than 50 metres but less than 200 metres.
It is less than 200 metres.
As a minimum, how often shall life boats be launched with their assigned operating crew aboard and manoeuvred in the water according to SOLAS?
The International Maritime Bureau Piracy Reporting Centre attributes the increased numbers of hijacking to:
Higher crime rates around the world.
The greater involvement in piracy of well-organized and armed crime networks.
Easy access to military weapons.
As per IMDG Code, fishmeal not treated with anti-oxidant, would be carried on a container vessel under:
Class 4.2 – Flammable solid.
Class 4.1 – Flammable solid.
Class 9 – Miscellaneous dangerous substances and articles.
Class 5.1 – Oxidizing substance.
For security purposes, the IMDG Code should be read in conjunction with the:
Chapter XI-2 of SOLAS and Part A of the ISPS Code.
Chapter V of SOLAS and Annex II of MARPOL.
IMO NVIC 24 and 46 CFR 2.05.
Part B of the ISPS Code and Chapter II of the Maritime Transport and Offshore Facilities Act.
Notification logging procedures (OPA-90):
Every report or message must be logged including time and date.
Only verbal reports for documentation.
Only initial reports to be logged.
Only communication with USCG.
The correct functioning of a DSC-modem can be checked by means of:
The built-in test facility in the modem.
Tester provided with the equipment.
The testing-mode of the ever present VHF-DSC-EPIRB.
The obligatory monthly transmission from the RCC’s.
Carriage of wet scrap steel borings, turnings and swarf in containers is generally considered dangerous, because:
It can spontaneously ignite.
The moisture will cause a huge increase in the weight of the cargo.
The cargo will not dry out en route enroute.
This type of cargo will corrode the container.
The Training Manual shall contain instructions and information on the life-saving appliances and the best method of survival. The training manual shall contain detailed explanations of crew duties in relation to emergency situations. Which of the following tasks or duties shall be included in the manual according to present regulations?
The use of surface to air visual signals to be used by survivors.
The use of navigational equipment for survival crafts.
The use of the ship’s line throwing apparatus.
The use of escape routes and other escape methods.
A container vessel’s hatch pontoon quick acting cleat will need to be replaced:
When the rubber washer is compressed and hardened.
When the cleat has sprung open at sea.
When the cleat retainer is rusty.
When the cleat retainer is distorted.