Le test consiste en des questions aléatoires sur un sujet sélectionné.
How many buoyant smoke signals are carried in each liferaft with SOLAS B pack?
The fire point is
The maximum pressure that will be reached when a given combustible burns into an enclosed space
The minimum temperature at which a combustible gives off vapours that may burn in contact with oxygen in air, and at which combustion persists once the source of ignition has been removed
A process of chemical decomposition by oxidation-reduction at unusually high temperature, in areas with slight ventilation.
The minimum temperature at which a combustible gives off vapours that may burn when they are in contact with oxygen in air, when there is a presence of activation energy; but with no capacity of maintaining combustion.
*How many sources of power must a fire detection and fire alarm system be provided with?
At least two, one of which being a dedicated accumulator battery
At least three, one of which being a dedicated accumulator battery
*Which code regulates the transportation of dangerous goods by sea ?
What is the requirement for stopping arrangements for power-ventilated accommodation spaces, cargo compartments, machinery spaces, service spaces and control stations (ships other than passenger ships carrying more than 36 passengers)? (SOLAS II-2/16.10)
Must be capable of being stopped from an easily accessible position outside the space being served
To be remote by controlled from central fire control panel
Only manually operated stopping arrangement allowed
Automatic closure controlled by the ship's fixed fire-detection and alarm system
Which ships shall be provided with international shore connection for supply of water as extinguishing media? (SOLAS II-2/19.1)
Passenger ships of 1000 tons gross and upwards
All ships of 500 tons gross and upwards
Passenger ships carrying more than 36 passengers
*You are the officer of the watch at the bridge of a cargo ship. In the middle of the night, an alarm sounds on the control panel of the fire detection system. It indicates that a detector is activated in the crew's accommodation. What is the first action you would take?
Acquit the alarm and wait till it sounds again before taking any other action
Run to the scene as fast as possible and start fighting the fire by all available means
Sound the fire alarm signal and send the seaman on watch down to inspect and report the situation
Regular ‘updating’ of a vessel’s position in an Inmarsat-C installation is among other things of importance:
to exclusively receive MSI-reports meant for the NAVAREA where the vessel is
because the Inmarsat organisation, in connection with the good reception of MSI-reports, makes it……
because MSI-reports for own vessel can't be received otherwise
On board they want to have a dial-phone call via Inmarsat with the Apollogracht. In the guides the following ID’s are found for the Apollogracht:344320000, 424432010, 424432020, 1300210, 36715. What ID should be chosen:
What rules and regulations are regulating the watch keeping routines in the engine room?
International Standard for Training and Watch keeping (STCW)
Both STCW and Class rules
If a person is in a state of shock, what of the following is the correct thing of you to do?
Apply hot-water bottles to keep the pasient warm.
Move the casualty as much as possible.
Treat and reassure the casualty and stay with the person at all times.
Be kind to the casualty and give anything to eat or drink at first opportunity.
Most cases of oil pollution are caused by human errors, often jointly by seafarers and shore based clean-up teams. What has proved to be the essential mistake executed by the shore people regarding environment damages?
Dispersement of chemicals?
In some trades cargo hoses are carried onboard. These hoses are normally checked and tested annually. Amongst other testes and checks, a pressure test is done. The latter shall be done up to the working pressure of the hose plus:
Give t he meaning of the following symbol
International shore connection
Give the meaning of the following symbol
Wheeled fire extinguisher
Portable fire extinguisher
How can a new officer, just boarding a ship, ensure that he knows the location and operation of all navigational and safety equipment and take account of the operating limitations of such equipment?
By using the equipment on regular watchkeeping duties
By following the standard company Induction procedures for a bridge watchkeeping officer
By asking other officers and practicing with the use of the equipment
The certificate of competency will ensure the officer has suitable competence in operating the bridge equipment
The tug has been released and is all clear. As officer in charge of that operation, should this be reported and to whom?
No need for reporting as the order was given from the bridge
Report all clear to the tug
Reported all clear to the Bridge
Report all clear to the Engine Room
*The person in charge of a lifeboat :
must check that the crew under his command are acquainted with their duties
must have a list of the survival craft crew
must check that the second in command has also a list of the lifeboat crew
Which of the following features is required for an anti-exposure suit ?
is marked with the name of the vessel to which the appliance belongs
does not sustain burning or continue melting after being totally enveloped in a fire for a period of 2seconds
is made of such a material that it cannot be torn
can be continously worn without impeding every duties to be performed by the wearer when in normal watch on the bridge
*Which one among the following information shall be marked on the container of an inflatable liferaft:
the port of registry of the ship to which the liferaft belongs
the name of the ship to which the liferaft belongs
the number of the liferaft
maximum permitted height of stowage above waterline
Which item among those below is included in the normal equipment of every lifeboat ?
one immersion suit for each person
sea-charts and navigating equipment
one whistle or equivalent
Which one of the listed requirements regarding rigid liferafts do not correspond to present regulations? The liferaft shall have:
floor preventing the ingress of water
all entrances fitted with rigid boarding ramps for boarding the liferaft at sea
a manually controlled lamp fitted inside the liferaft
a manually controlled lamp, visible of at least 2 miles, fitted at the top of the canopy
*Food rations provided to each person the liferaft is permitted to accommodate is totalling:
The Training Manual shall contain instructions and information on the life-saving appliances and the best method of survival. The training manual shall contain detailed explanations of crew duties in relation to emergency situations. Which of the following tasks or duties shall be included in the manual according to present regulations?
The use of oars and other propulsion equipment for survival crafts.
Best use of the survival craft facilities in order to survive.
The use of navigational equipment for survival crafts.
The use of on-board communication equipment.
Breathing apparatuses is an important piece of equipment for being able to fight a fire onboard a vessel. What routine precautions to be observed with regard to use and maintenance of such equipment?
That personnel having a beard are not selected as smoke divers.
All the mentioned alternatives.
That the equipment always to be kept cleaned,checked and bottles are recharged immediately upon use, and frequently inspected.
That personnel that are appointed as smoke divers, primarily are given a shore based proper basic education and training.
Which type of compressors is used as cargo compressors onboard gas carriers?
Piston, screw and centrifugal type compressors.
Oil free piston compressors.
Three stage piston compressors.
Three stage screw compressors.
If an inhibitor is added to an oil cargo, which of the following is a summary list of items to be included on its accompanying certificate?
Inhibitor name; amount added; date added; period of efficiency; precautions if voyage length exceeds that period; eventual temperature limitation.
Inhibitor class; amount added; date of expiry; minimum period of optimum efficiency; precautions to be taken when added; minimum temperature requirement.
Inhibitor class; percentage blended; date added; maximum period of efficiency and applicable temperature limits; maximum storage period on board; contact number of manufacturer.
Inhibitor name; percentage applied; date of expiry; precautions to be taken on voyage and interval of application; maximum temperature at which continuously effective.
Use of …… and …… is strictly prohibited on the ro-ro deck, signs shall be displayed
Personal Protective Equipment and Mobile telephones
Which cell voltage is required to trickle charge a lead acid battery?
Basic manual dew point measurement devices are commonly used by surveyors when monitoring the dryness of a cargo tank prior to loading a liquid chemical product. Which of the descriptions below is a summary of how the measurement is carried out?
A small quantity of Methanol is placed into the device and dry-ice is progressively added to it to steadily reduce the temperature. A sample of the atmosphere in the tank is continuously drawn through the device, passing over the surface of the Methanol. When the first signs of evaporation are observed (smoke rising from the surface), the temperature of the Methanol is noted. Reference may be required to tables to correct the reading for calculation purposes.
A quantity of Acetone is placed into the device and dry-ice is progressively added to it to steadily reduce the temperature. A sample of the atmosphere in the tank is continuously pumped through the liquid. Bubbles will be seen to reach the surface of the bath until the dew point is reached. When the flow of bubbles ceases, the temperature of the Acetone is noted. Reference may be required to tables to correct the reading for desired parameters.
A small quantity of Acetone is placed into the device and dry-ice is progressively added to it to steadily reduce the temperature. A sample of the atmosphere in the tank is continuously drawn through the device, passing over the polished or mirrored surface of the container. When the first drop of mositure (dew) is observed to form on the polished surface, the temperature of the Acetone bath is noted. Reference may be required to tables to correct the reading for desired parameters.
A small quantity of dry-ice is placed into the device, submerged in deionized water. A sample of the atmosphere in the tank is continuously drawn through the device, passing across a reagent filter. When the dew point is reached, this reagent filter will change colour from white to green, indicating saturation. The temperature of the deionized water is noted at this time and corresponds to the dew point. Reference to correction tables is required to correct the reading for barometric pressure.
What should be done if cracks are found on portable deck supports?
Disallow vehicles from passing over the portable deck
Inform the stevedoring foreman
Stop cargo operations and inform the master
On a RoRo vessel, which of the following is not required in the pre-stowage plan?
Checking communications equipment
The operation of gas-tight and watertight doors
Stowage and securing of specialised cargoes
What charateristics of Seed Cake group B (IMDG Class 4.2) cargo should be considered when carrying in bulk?
The only concern is that the cargo may self-heat slowly.
The only concern is the cargo may be liable to oxidise, causing subsequent reduction of oxygen in the cargo spaces
The only concern is that the cargo may be liable to spontaneous combustion.
Cargo may self-heat slowly; may spontaneously ignite; liable to oxidise; may produce carbon dioxide
On a General Cargo Vessel, what must be done if a crane or derrick block sheave is found to be worn?
No action needs to be taken
Inform Chief Officer and prepare to change block if required
Block changed at next thorough inspection
Monitor condition of block regularly
Why is air draught an important consideration when loading bulk cargoes on Bulk Carriers?
Because the vessel may pass under a bridge(s) whilst approaching or leaving the berth
Because of the vessel's movement whilst berthing or unberthing
Because of variations in under keel clearances whilst alongside the berth
Because of movement of the bulk cargo loader or unloaders
What is the purpose of having deep tanks on a general cargo ships?
Primarily for ballasting and to aid the stability when loaded, but may be used for liquid cargo
To raise the centre of gravity of the ship and make it a smaller GM and reduce the rolling period
Why do rolled joints of meat carry a higher risk of bacterial infection?
Because rolled joints are normally purchased already prepared and the quality control of a shore supplier can not be guaranteed.
Because meat of a poorer quality is generally used in rolled joints.
Because any bacteria that were present on the outside surface of the meat will be transferred to the inside when the joint is rolled.
Because the temperature necessary to kill bacteria can never be reached in the middle of a rolled joint.
Following replacement of a diesel alternator governor the machine is test run on load. It is found that as the load is gradually increased the voltage and the frequency gradually fall to an unacceptable level. The governor is a mechanical hydraulic type. Select from the options given the correct adjustment to make to correct the situation.
The governor load limit should be increased.
The governor droop should be increased.
The governor droop should be reduced.
The governor load limit should be reduced.
How often shall the master review the safety management system?
It is required that a crewman enters a refrigerated compartment containing produce at minus 60 degrees Celsius. Which of the items of personal protective equipment given in the options is the most important for the crewman to wear?
Many large, slow speed diesel engines have direct oil cooling of the piston crowns provided. An automatic slow down and alarm are sometimes fitted to protect against failure of this system. Which parameter is usually used to initiate this slow down?
Low oil pressure in the piston crown cooling space.
Low flow or no flow in the cooling oil return line.
High temperature of the piston crown.
Low pressure in the cooling oil return line.
A refrigerated container is loaded on deck. On inspection it is noted that the door seals are damaged. Select, from the options given, the main reason why it is unacceptable to have a refrigerated container in such a condition.
If the door seal is damaged the cargo packaging may become watermarked.
If the door seal is damaged the cargo may spoil due to ingress of warm air.
The refrigeration unit will run for more time than is normal.
The refrigeration unit will ice up to a greater extent than normal.
Why is an inertgas system required when COW is undertaken?
Improved outturn of cargo?
Less bildup of sediment in tanks?
Recording the pulp temperature of fruit at all stages of the transport chain provides a valuable record of the status of the product. Which of the procedures given in the options should be adopted by a deck officer when dealing with the fruit?
After taking the pulp temperature the individual piece of fruit should be retained in the space with other specimens that have been used
After taking the pulp temperature the individual piece of fruit should be discarded as the specimen used will usually spoil rapidly.
It does not matter whether or not the specimen is left in the cargo space as the carriage temperature will preserve it.
After taking the pulp temperature the individual piece of fruit should be returned to the carton of fruit from which it was sampled
Is there any requirements regarding double bottom for large passenger ships?
Yes, in ships of 76 m in length and longer, a double bottom shall be fitted amidships, and extend to the fore and aft not less that ? of the ship length.
No, a double bottom is not required
Yes, in ship of 76 m in length and upwards, a double bottom shall be fitted amidships, and shall extend to the fore and after peak bulkheads, or as near thereto as practicable.
Yes, a double bottom shall be fitted amidship
From the options given, select the type of cleaner that is most suitable for washing down a refrigerated cargo space.
A cleaner which contains a powerful bleaching agent.
A cleaner which has a fresh smell such as the smell of pine.
A cleaner containing a powder scouring agent.
Why shall you never pour water into hot fat?
The fat will stiffen immediately and need reheating.
The water will explode into steam causing hot fat to be thrown far away thus possibly causing severe burns or fire.
The water will turn into steam and cause the fat to explode.
The fat will not be edible any more.
Spray painting has been carried out in the engine room while the engine was running, and the turbocharger intake filter was not protected. Which one of the options given is most likely to result from this?
Scavenge air pressure lower than normal.
Exhaust gas temperatures lower than normal.
Scavenging air pressure is higher than normal
The revolution of the turbocharger lower than normal.
What is the maximum quantity of cargo permitted to be carried in a single tank on a type 2 chemical tanker?
Give the meaning of this symbol:
lifebuoy with light and line throwing appliance
lifebuoy with light and smoke
lifebuoy with light and hand flare
lifebuoy with automatic sound signal
What should be done if a vessel is trimmed outside the limits of its trim correction tables during a draught survey?
Bring the vessel to within the trim limits imposed by the tank sounding tables prior to carrying out the survey
Ask the attending surveyors to extrapolate the tables for the excessive trim
Bring the vessel to within the trim limits imposed by the tank sounding tables prior to taking tank soundings
Consult the classification society concerned
Following overhaul of the cylinder units of a 4-stroke diesel engine and a suitable running in period it is noted that the lubricating oil consumption of the engine has increased considerably and unexpectedly. The engine is otherwise running normally. Select, from the options given, the most likely cause of this problem.
A piston crown has burnt through
The oil control ring has been fitted incorrectly.
The piston rings have worn rapidly.
The cylinder liner has worn rapidly.
Can unrestricted tank cleaning operations take place from a chemical tanker in any sea area? Read all the following statements carefully and consider the reasons behind the answers as shown.
No. The type of previous cargo, the amount of residues, the ship's speed, the distance from the nearest land, the depth of water and whether the ship is in a "special" sea area are all factors that will need to be considered before tank cleaning is permitted.
No. Certain countries have exercised territorial rights over extended sea areas and control all marine activity within them, including the disposal of tank washings from tankers.
Yes. The tank cleaning equipment typically fitted on modern chemical tankers guarantees that legal dilution rates are achieved and that there is no threat to the marine environment in any location.
Yes, but only if the ship has undergone a special opetrational survey and is certified for unrestricted tank cleaning operations by the IMO.
How do container ships without hatch covers comply with the International Convention on Load line Rules?
An International Load Line Exemption certificate will be issued in accordance to Article 6.
A special movable deck is provided to ensure watertight integrity
There will always be hatch covers on ships to comply with the International Load line Rules
This type of container ship does not need to comply with the Load line Rules
Marine diesel engines are normally provided with automatic protection devices which operate in the event of abnormal conditions arising. Why would medium speed engines used for main propulsion normally only automatically slow down for certain abnormal conditions but automatically shut down for the same conditions when used to drive an alternator?
The gearbox and clutch of the propulsion system may be damaged if the engine suddenly stopped.
Sudden total loss of propulsive power may seriously endanger the vessel. This is a greater risk than engine damage.
Since the engine used for propulsion would usually be bigger the sudden stop would generate greater thermal stress which may damage the engine.
The vessel could continue to operate and manoeuvre without any electrical power at all as long as the main engine is still running.
What are the three categories to which hazardous liquid chemicals are assigned under MARPOL Annex II?
Why is it important to check the timing on the cylinder oil lubricators?
To get the right amount of oil into the cylinder.
To avoid excess lubrication.
To avoid high temperature in the combustion chamber.
To get the oil into the cylinder when the piston is in the right position.
A bulk carrier is about to commence loading steel coils using ships cranes, what three important checks must be made?
Cabs cleaned and lighted, drivers regularly rested
Crane windows cleaned,cab heater on and no- smoking rule enforced
Crane controls tested, limit switches correctly set and SWL never to be exceeded
Planned maintenance completed, all paintwork in good condition and lighting checked
By what formula is the displacement calculated? W = Displacement; L = length; B = Breadth; D = depth of vessel; Cb = Block Coefficient; Cw = Coefficient of waterplane; RD = relative density;
Which statement about the garbage record book is true?
Each entry is to be written in the language of the ship's flag state
It is required by all ships on International voyage
Each entry is to be signed by the Master
It is used to record all operational and accidental garbage discharges
The following chemical cargoes are all "carcinogens": Acrylonitrile, Aniline, Benzene, Chloroform, Epichlorohydrin and Toluene. What is a "carcinogen"?
A substance capable of burning tissue from contact with its vapours alone.
A cargo which requires cleaning at a specific temperature as listed in MARPOL.
A substance capable of inducing cancer.
A high-grade oil product, obtained by repeated distillation.
TBN - total base number from a lube oil test, indicates the:
Amount of organic acids in the oil.
Amount of contaminants in the lubricating oil.
Alkalinity of the lubricating oil.
Medium and high speed diesel engines used for electrical generation duties on board ship have overspeed protection devices fitted to protect the engine in case the electrical generator trips while carrying high loads. Why are these devices necessary?
To stop the engine before any serious damage occurs due to excess inertial loads.
To stop the engine before any serious damage occurs to the electrical components due to excess voltage and frequency.
To stop the engine before any serious damage occurs due to rapidly changing thermal loads.
To stop the engine before any serious damage occurs due to rapidly changing cylinder pressures.
If the strength of the wind is related to the pressure gradient and the space between the isobars, which of the following statements is correct?
The closer the isobars are together the stronger will be the predicted wind.
The pressure gradient is a measurement of the distance between the high and the low pressures and is not associated with isobars.
Strong winds are found in areas where the isobars are not close together
The wind force is related to the difference in pressures and blows directly between the centres of high and the low pressure
The recommended distance between parallel tracks (track spacing) in a search for a casualty by a surface vessel varies (amongst other factors) according to visibility and the nature of the target in the IAMSAR Manual. These distances are then normally adjusted for prevailing weather conditions. If visibility was 5 nautical miles and you were looking for a six-person liferaft, what would the recommended uncorrected track spacing be?
A cargo of frozen tuna is being loaded onto a conventional reefer vessel. Without using a pulp thermometer, which of the given options would give an indication that the fish was in good condition.
The surface of the fish would feel hard to the touch.
The fish would sound solid and make a thump sound when dropped.
The surface of the fish would feel cold to the touch.
The fish would sound like wood when dropped or tapped with a hammer.
Which is the "STARBOARD QUARTER", in the figure?
The Starboard quarter is C, in the figure
The Starboard quarter is B, in the figure
The Starboard quarter is A, in the figure
The Starboard quarter is D, in the figure
Which one of the listed requirements for passenger ships regarding personal life-saving appliances do not correspond to present regulations?
The 5% extra lifejackets carried on board have to be stowed in conspicuous places on deck or at the muster stations?
Ro-ro passenger ships shall carry at least 2 lifebuoys provided with self-igniting lights an self-activating smoke signals
All lifejackets shall be fitted with reflex, a whistle and a light
All lifejackets shall be fitted with a whistle, a light and a smoke signal
What additional stability information is required before a bulk carrier can load a full cargo of grain?
Grain loading conditions must be shown and the vessel is in possession of a Document of Authorization
The information is in a standard stability book should be sufficient to calculate a grain condition.
A bulk carrier cannot load a grain cargo
No additional conditions are required to be shown
What does the term "Dead Ship" mean?
"Dead Ship" means that the ship cannot make way through the water
"Dead Ship" means that the ship is aground
"Dead Ship" means that auxiliary machinery is not operational
"Dead Ship" means that the machinery and boilers are inoperational due to lack of electrical power
Data loggers are a vital part of the temperature control and monitoring system on a reefer vessel. In a situation where the data logger fails several days before the end of the voyage it is still necessary to maintain control of and monitor cargo temperatures. How could an accurate, portable thermometer be used to the best effect, to achieve this, in such a situation?
Use the thermometer to maintain the delivery air settings as they were prior to the data logger breaking down.
Use the thermometer to check the pulp temperature by entering the cargo space and placing it in the centre of the stow.
Use the thermometer to check and control the delivery air temperature by inserting it in the delivery air ducting close to the evaporators.
Use the thermometer to check and control the return air temperature by holding it in the return air space on top of the cargo.
What are the duties of the watch-keeping engineer?
The duties of the watch-keeping engineer are to keep constant surveillance of machinery and auxiliary systems and to inspection the steering gear at least once a watch
The duties of the watch-keeping engineer are to maintain the required ship's speed
The duties of the watch-keeping engineer are to ensure that the machinery spaces are properly manned
The duties of the watch-keeping engineer are to keep constant surveillance of the steering gear and hydraulic system
The International Convention for the Prevention of Pollution from Ships (MARPOL) covers detailed regulations to prevent various sources of ship generated pollution. Annex I - VI deals with regulations for the prevention/ control of pollution from:
All Harmful Substances we have onboard
Proper Pollution Prevention Training
Harmful Substances in Packaged Form, Sewage, Air Pollution, Garbage, Oil and Noxious Liquid Substances in Bulk
Oil, Noxious Liquid Substances in Bulk, Harmful Substances in Packaged Form, Sewage, Garbage and Ballast Water
What can be done to effectively reduce the rate of ice accretion on containers during loaded sea passage?
Have the crew remove the ice
When can a partly loaded bulk cargo space be entered when the vessel is at sea?
On instructions from the CPO (Bosun)
In no circumstances except possibly in an emergency
For hatch cleaning purposes
In discussing the properties of oil cargoes, which of the following are examples of Aromatic Hydrocarbons?
Benzene, Toluene and Xylene.
Hydrogen Sulphide and Carbon Monoxide.
Carbon Dioxide and Hydrogen Peroxide.
Propane, Butane and Pentane.
In which of the following processes will the time constant be of minor importance
What is the main reason for adding inhibitors to some liquefied gas cargoes such as ethylene oxide and vinyl chloride?
To reduce the boil-off rate of the cargo.
To prevent polymerisation of the cargo.
To control the temperature of the cargo.
To reduce the toxicity of the cargo.
What is the name of UN maritime division?
The UN maritime division is UNM (United Nations Maritime)
UN does not have any maritime division.
The UN maritime division is IMO (International Maritime Organisations)
The UN maritime division ISO (International Shipping Organisation)
What is the minimum number of relief valves to be fitted to any cargo tank of greater than 20 cubic meters capacity?
Minimum one pressure relief valve.
The number of relief valves is dependent of type of gas carrier.
At least two pressure relief valves.
Minimum two pressure relief valves in addition to the MARVS.
A cargo of frozen chicken is being presented for loading into a conventional reefer vessel. Which of the options given is the most appropriate packaging method that should be used for such a cargo?
It should be wrapped in plastic and stowed loose.
It should be packed in cardboard cartons.
It should be packed in wooden cases.
It should be packed in plastic sacks.
What would be the most probable cause of too high an exhaust gas temperature from one cylinder?
Air in the fuel oil system.
Turbo charger filter clogged.
Water in the fuel oil system.
The thermo-expansion-valve is a part of the refrigeration system. What is the thermoexpansion valve doing?
Regulating the suction pressure.
Regulating the cargo hold temperature.
Regulating the cooling-water temperature.
Regulating freon liquid flow to the evaporator.
Occasions may occur that survey has to be undertaken via rafting. What is recognized as minimum height between lowest flat-faced web and water level?
What would be the most probable cause of a drop in the lubricating oil pressure?
Too low admission on fuel injection pump.
The starting air valve is fitted for the purpose of:
Bringing the engine up to sufficient number of revolutions for combustion to take place and engine to run
To retard the engine revolution for manoeuvring purpose.
Bringing the engine up to full rpm to start the engine
Turning the engine for starting preparations
The starting air valve is fitted for the purpose of:
Turning the engine for starting preparations.
Bringing the engine up to sufficient number of revolutions for combustion to take place and engine to run.
Bringing the engine up to full rpm to start the engine.
To retard the engine revolution for manoeuvring purpose.
The boiler have been shut down completely for inspection and repair. You have finished work and are going to start firing the boiler. What is the correct procedure for heating a boiler from cold?
Start the firing on minimum rate and continuously fire until boiler is up to pressure.
Start the firing on minimum rate and alternate with maximum rate continuously firing until the boiler is up to pressure.
Start with intermittent firing, using small firing periods and long intervals gradually building up to longer firing periods and shorter intervals.
Start the firing on maximum rate and raise the pressure in as short a period as possible, to save energy.
Indicate the correct name of the tool on the sketch: