Der Test besteht aus 80 zufälligen Fragen.
Gesamtzahl der Fragen zu diesem Thema: 115
The MF/HF-transceiver on board is tuned to the assigned frequency of a station. To make this connection on the following mode is is used:
At the entrance to the space where batteries are stored on board the following notice must be fitted:
No entry with naked light and/or flame.
Which of the following two digits codes is used to obtain medical assistance?
If for some reason a vessel does not issue comply with vessel a Classification requirements, what can a surveyor to the enabling it Society’s to sail to the next port or for a period of time?
A Notification of Deficiency.
A revised Class Notation.
Which of the following two digits codes is used to obtain medical advice?
What is the action that a GMDSS Radio Operator should take when a DSC distress alert is received?
The Operator should immediately set continuous watch on the radiotelephone frequency that is associated with frequency band on which the distress alert was received.
No action is necessary, as the DSC control will automatically switch to the NBDP follow-on communications frequency.
The Operator should immediately set continuous watch on VHF channel 70.
Which of the following two digits codes is used to obtain maritime assistance?
Messages sent via INMARSAT-C are charged:
On the number of kilobits of information transmitted per block of 256 bits.
On the basis of a three minute minimum charge with one minute incremental steps.
On the number of kilobits of information transmitted per block of 1 024 bits.
On the basis of a six second minimum charge with six second incremental steps.
What is the world-wide system operated by the US Coast Guard exclusively in support of search and rescue operations?
The Automated Mutual-Assistance Vessel Rescue (AMVER) System.
The Worldwide Mutual Assistance Programme (WMMAP).
The US Command and Control Rescue (USCOMR) Service.
When should a crew member joining a ship for the first time be given some training and instructions in the use of the ship’s fire-fighting appliances?
As soon as possible but not later than 2 weeks after he joins the ship.
As soon as possible but not later than 24 hours after he joins the ship.
What mode must be used on the MF/HF transmission, when transmitting a telex-message:
How often must inspection of proper working of the EPIRB’s and SART’s take place on board? Once per:
For a search to be effective it must be:
Inclusive of all personnel.
Conducted by personnel with limited knowledge of the ship’s layout.
According to Rule 26 of the International Regulations for Preventing Collisions and the illustrated lights, what type of vessels are they?
These are two vessels engaged in fishing (pair trawling), showing the additional volutary signals for hauling nets.
This is a vessel engaged in towing a disabled tow, restricted in its ability to manoeuvre, with a searchlight used to highlight the location of the tow.
These are two vessels engaged in fishing (using purse-seine gear). The searchlights are simply working lights.
These are two vessels engaged in fishing (pair trawling), showing the additional voluntary signals for shooting nets.
Which of the following is the correct minimum carriage requirement for a ship of more than 300 gross tons and operating in area A1:
1 VHF RT + DSC + DSC watch receiver – 1 or 2 SART – 1 NAVTEX or 1 EGC receiver – 2 or 3 VHF portable – 1 EPIRB.
1 VHF RT – 1 or 2 SART – 1 NAVTEX or 1 EGC receiver – 2 or 3 VHF portable – 1 EPIRB.
1 VHF RT + DSC + DSC watch receiver – 1 or 2 SART – 1 NAVTEX or 1 EGC receiver – 2 or 3 VHF portable.
An Oil Record Book, Part 1, shall be provided to every ship of 400 tons gross tonnage and above to record machinery space operations.Out of below mentioned operations, it is compulsory to record:
Bunkering of bulk lubricating oil.
Discharge of water from Aft, Peak Tank.
Transfer of oil from settling – to daytank.
Additional lashings on general cargoes must be considered when:
The density of the water.
Passing trough the Tropical Zone in winter months.
Passing through the Summer Zone in winter months.
Who will have the authority to take charge and make appropriate decisions in the event of a vessel emergency when transiting the Panama Canal?
The Panama Canal Authority.
The Master and Pilot will agree the best course of action to be taken to resolve the emergency situation.
The value of the GZ lever at small angles of heel on a General Cargo Vessel can be denoted by the formula:
KM – KG × Sin angle of heel.
KN – KG × Sin angle of list.
KM – Corrected KG × Sin angle of list.
KN – Corrected KG × Sin angle of heel.
What type of search pattern is recommended in the IAMSAR Manual as most effective for a single vessel, when the location of the search object is known within relatively close limits?
On a General Cargo ship, the most likely cause of a hatch cover hydraulic system to deteriorate would be:
Due to hatch cover operations in high summer temperatures.
Due to repeated hatch cover operations.
Due to ice accretion on piston jackets.
Due to dust and cargo particles lodging around the piston seals.
If W = Displacement, L = length, B = Breadth, D = depth of vessel, Cb = Block Coefficient, Cw = Coefficient of Waterplane, RD = Relative Density, then:
What is the main theme of modern safety practice?
Making use of Risk Assessment as a means to improving safety.
Consult the chief officer before commencing work.
Health & Safety at Work Act.
Use the same practice that has been in place for some time.
Which of the following is the correct minimum carriage requirement for a ship of more than 300 gross tons and operating in area A1:
1 VHF RT + DSC+ DSC watch receiver – 1 or 2 SART – 1 NAVTEX or 1 EGC receiver– 2 or 3 VHF portable – 1 EPIRB.
1 VHF RT + DSC + DSC watch receiver – 1 NAVTEX or 1 EGC reveiver – 2 or 3 VHF portable – 1 EPIRB – 1 MF RT + DSC + DSC watch reveiver – 1 INMARSAT A, B or C and 1 HF RT + DSC + DSC watch reveiver.
1 or 2 SART – 1 NAVTEX and/or 1 EGC receiver and/or 1 HF NBDP watch receiver – 2 or 3 VHF portable – 1 1 HF RT + DSC + DSC watch reveiver.
A General Cargo vessel has a 50 tonne SWL heavy lift derrick and a load of 48 tonnes is to be loaded. The lifting gear of slings and spreader bar weighs 4 tonnes. In this case, it would be correct to state that:
The load cannot be loaded because the combined weight of the load and the lifting gear must at least 10 % less than the SWL of the derrick.
The load can be loaded because the load itself is less than the SWL of the derrick.
The load can be loaded because the SWL can sometimes be exceeded by small amounts in cargo operations.
The load cannot be loaded because the combined weight of the load and the lifting gear will exceed the SWL by two tonnes.
The MF/HF-transceiver on board is tuned to the assigned frequency of a station. To make this connection the following mode is used:
Which one of the following items has to be included in an abandon ship drill according to SOLAS regulations?
Checking that life-jackets are correctly donned.
Launching and recovery of a survival craft.
Manoeuvring the lifeboat in the water.
What is the action that a GMDSS Radio Operator should take when a DSC distress alert is received?
The Operator should immediately set continuous watch on the radiotelephone frequency that is associated with frequency band on which the distress alert was received.
The Operator should immediately set continuous watch on the NBDP frequency that is associated with frequency band on which the distress alert was received.
No action is necessary, as the DSC control will automatically switch to the NBDP follow-on communications frequency.
The Operator should immediately set continuous watch on VHF channel 70.
Prior to loading general cargo on a General Cargo vessel, with regard to lashing wires, terminations, shackles, turnbuckles, pad eyes and D rings etc., you must make sure that:
They must all be certified and be (visually) unimpaired.
Lashing wires must be new whereas other accessories may be certified.
They must all be visually inspected.
They must all be certified.
When conducting a risk assessment for a shipboard work activity, the two elements to be considered are:
The time available to complete the task and the resources to hand.
The potential severity of harm and the likelihood that harm will occur.
The available manpower and their experience in this type of work.
The chance of an incident re-occuring and the potential effects of an loss.
The steps of the embarkation ladder used must be spaced apart by a distance of:
Equally spaced, not less than 300 mm or more than 380 mm.
Equally spaced, not less than 200 mm or more than 280 mm.
A General Cargo vessel has a 50 tonne SWL heavy lift derrick and a load of 48 tonnes is to be loaded. The lifting gear of slings and spreader bar weighs 4 tonnes. In this case, it would be correct to state that:
The load cannot be loaded because the combined weight of the load and the lifting gear will exceed the SWL by two tonnes.
The load cannot be loaded because the combined weight of the load and the lifting gear must at least 10 % less than the SWL of the derrick.
The load can be loaded because the load itself is less than the SWL of the derrick.
The DSC-controller display the following: DOO: 244562000 CH16; S distress sinking. After receiving this DSC message the following is done immediately:
Listen out on VHF channel 16.
Send a “distress alert relay”.
Give a “DSC-acknowledgement”.
DG placards shall be located on a freight container:
One on each end and one on each side.
One of the back end and one on one of the sides (only).
Which of the following channels and modes should be used when initiating a distress alert transmission?
Channel 13 Radiotelephony, channel 16 DSC.
Which of the following two digits codes is used to obtain maritime assistance?
By the degree of selectivity of a receiver is meant:
Ability to make weak stations audible.
Ability to distinguish weak stations from adjacent stronger stations.
Ability to prevent variations in the strength of radio frequency signal received.
The operating mode of a pyrotechnic signal depends essentially on:
The fact that the user is on board a liferaft, a lifeboat or ship.
Instructions or diagrams printed on its casing by the manufacturer.
The weather conditions of the moment.
A definite standard process.
Which of the options best describes how a “Balanced Rudder” is constructed?
Part of the rudder area is forward of the turning axis, therefore reducing the load on the steering motor.
Equal rudder area forward and aft of the turning axis, the turning axis being at the geometrical centre of the rudder area.
Operated by two steering motors providing equal amounts of thrust to the rudder.
The majority of convensions adopted under the auspices of IMO fall into which of the three main categories:
Maritime Safety, Safety, Prevention of Marine pollution, Liability and compensation.
There are no connections that fall under IMO.
Who will have the authority to take charge and make appropriate decisions in the event of a vessel emergency when transiting the Panama Canal?
The Panama Canal Authority.
If the speed of a vessel through the water is HALVED, how will this effect squat?
The squat effect will be reduced to a quarter of its original value.
There will be very little change to the effects of Squat.
There will be a significant change in the reduction of underkeel clearance, but the amount varies from ship to ship.
The squat effect will also be halved.
The most important consideration when planning the lashing system for a particular sea route on a General Cargo Vessel is:
Transverse accelerations.
The quantity and type of lashing materials.
The size and weight of packages/cargo units to be loaded.
The steps of the embarkation ladder used use d must be proportioned as it follows:
Length = 480 mm, breadth = 115 mm, depth = 25 mm.
Length = 280 mm, breadth = 85 mm, depth = 10 mm.
Length = 580 mm, breadth = 165 mm, depth = 30 mm.
Length = 380 mm, breadth = 145 mm depth = 20 mm.
To maintain good relationship among the crew on board a vessel, one must be:
Understanding, Co-operative, and have respect from both sides.
Strict and authoritative while giving orders.
Give authority to others.
Polite and diplomatic while talking to crew members.
Steel coils when loaded on a General Cargo ship tend to be subjected to:
Chemical reactions between the steel banding and outer envelope.
The main purpose of a hatch cover ventilator grill on a General Cargo vessel is:
To prevent sparks entering the cargo hold.
To act as a strength member inside the ventilation shaft.
To prevent moisture from entering the hold.
To prevent the ventilation fans from damage.
Prior to loading general cargo on a General Cargo vessel, with regard to lashing wires, terminations, shackles, turnbuckles, pad eyes and D rings etc., you must make sure that:
They must all be certified and be visually inspected for any apparent damage.
They must all be visually inspected.
They must all be certified.
During helicopter evacuation of an injured man, what course should the ship steer?
As instructed by the helicopter pilot.
With the wind ifne on the bow opposite to the helicopter operating area.
With the wind astern so that the effect of the wind is reduced as much as possible.
Which one of the following items has to be included in an abandon ship drill according to SOLAS regulations?
Checking that life-jackets are correctly donned.
Launching and recovery of a survival craft.
Manoeuvring the lifeboat in the water.
Starting and operating radio life-saving appliances.
How often must inspection of proper working of the EPIRB’s and SART’s take place on board? Once per:
What does ISM stand for?
The International Management Code for the Safe Operation of Ships and for Pollution Prevention.
International Safe Manning Certification.
Internal Ship Safety Management.
International Ship Measurement and Pollution Control.
What possible reason could there be for the identification mark associated with a Racon not being visible on the radar screen?
The transmitted radar frequency may not trigger the Racon transmitter.
The racon may not be transmitting a pulse.
The radar may be suppressing the mark with application of the Interference Rejection control.
All of the suggested answers.
What type of dynamic forces may cause indent in plating on forecastle deck and main deck in way of pillars inside forecastle?
Pressure forces caused by green water on deck.
Forces created by waves on the forecastle.
Slamming in way of flat bottom forward of light draught.
You are proceeding along a coastal route when you hear this signal. The visibility is severely restricted. What does the signal mean?
There is a vessel aground in the vicinity vicinity. She is more than 100 metres in length. She is sounding an additional warning to approaching vessels that they are “running into danger”.
There is a vessel at anchor in the vicinity. She is more than 100 metres in length. She is sounding an additional warning signal to approaching vessels, directing them to “keep clear”.
There is a vessel at anchor in the vicinity. She is less than 100 metres in length. She is sounding an additional warning to approaching vessels that they are “running into danger”.
The main purpose of a hatch cover ventilator grill on a General Cargo vessel is:
To prevent sparks entering the cargo hold.
To act as a strength member inside the ventilation shaft.
To prevent moisture from entering the hold.
Which of the following is a ship MMSI?
To maintain good relationship among the crew on board a vessel, one must be:
Understanding, Co-operative, and have respect from both sides.
Polite and diplomatic talking to crew members.
Give authority to others.
A general cargo with a large metacentric height (GM) would be expected to have:
A fast roll period and small righting levers (GZ Levers).
A fast roll period and large righting levers (GZ Levers).
A long roll period and large righting levers.
A long roll period and small righting levers (GZ Levers).
For security purposes, the IMDG Code should be read in conjunction with the:
Chapter XI-2 of SOLAS and Part A of the ISPS Code.
Chapter V of SOLAS and Annex II of MARPOL.
Part B of the ISPS Code and Chapter II of the Maritime Transport and Offshore Facilities Act.
IMO NVIC 24 and 46 CFR 2.05.
What does ISM stand for?
The International Management Code for the Safe Operation of Ships and for Pollution Prevention.
International Safe Manning Certification.
Internal Ship Safety Management.
International Ship Measurement and Pollution Control.
When using an echo sounder in fresh water, the sounding indicated has as a small error, what is the cause of this?
The density of the water.
There should be no error with a properly working echo sounder.
The portable walkie talkies required to be carried by GMDSS regulations should have which channels as a minimum?
On a General Cargo vessel, a 16T derrick should be tested to a proof load of:
You are proceeding along a coastal route when you hear this signal. The visibility is severely restricted. What does the signal mean?
There is a vessel aground in the vicinity. She is more than 100 metres in length. She is sounding an additional warning to approaching vessels that they are “running into danger”.
There is a vessels aground in the vicinity. She is less than 100 metres in length. She is sounding an additional warning to approaching vessels to “navigate with extreme caution”.
There is a vessel at anchor in the vicinity. She is less than 100 metres in length. She is sounding an additional warning to approaching vessels that they are “running into danger”.
There is a vessel at anchor in the vicinity. She is less than 100 metres in length. She is sounding an additional warning to approaching vessels that they are “keep clear”.
Which of the following channels and modes should be used when initiating a distress alert transmission?
Channel 13 Radiotelephony and channel 16 DSC.
Channel 6 Radiotelephony.
What is the main theme of modern safety practice?
Use the same practice that has been in place for some time.
Health & Safety at Work Act.
Consult the chief officer before commencing work.
Making use of Risk Assessment as a means to improving safety.
What mode must be used on the MF/HF transmission, when transmitting a telex-message:
Which of the following requirements regarding on board stability data corresponds to present regulations? (NSCL 4/12.1).
A calculation example showing the use of “KG” limitation curves.
Drawings and calculations documenting the stability of the ship, both in intact and all possible damage condition.
A calculation example showing use of “GM” limitation curves.
Stability data produced by stability calculation instruments.
Steel coils when loaded on a General Cargo ship tend to be subjected to:
Chemical reactions between the steel banding and outer envelope.
Which of the following following requirements regarding on board stability data corresponds to pres present regulations? NSCL (4/12.1).
A calculation example showing the use of “KG” limitation curves.
A calculation example showing use of “GM” limitation curves.
Drawings and calculations documenting the stability of the ship, both in intact and all possible damage condition.
Where is the Safety Certificates for ships to be kept?
The majority of convensions adopted under the auspices of IMO fall into which of the three main categories:
Maritime Safety, Prevention of Marine pollution, Liability and compensation.
Maritime Safety, STCW, Maritime Security.
There are no conentions that fall under IMO.
Which of the options best describes how a “Balanced Rudder” is constructed?
Part of the rudder area is forward of the turning axis, therefore reducing the load on the steering motor.
A rudder with equal rudder area forward and aft of the turning axis, the turning axis being at the geometrical centre of the rudder area.
A rudder which is operated by two steering motors providing equal amounts of thrust to the rudder.
A rudder with an additional flap attached the training edge to improve the rudder efficiency.
When should a crew member joining a ship for the first time be given some training and instructions in the use of the ship’s fire-fighting appliances?
As soon as possible but not later than 2 weeks after he joins the ship.
As soon as possible but not later than 2 days after he joins the ship.
As soon as possible but not later than 24 hours after he joins the ship.
Which of following are security duties?
Calibration of security equipment.
Checking ID of visitors onboard.
Monitoring of restricted areas.
The value of the GZ lever at small angles of heel on a General Cargo Vessel can be denoted by the formula:
KM – KG × Sin angle of heel.
KM – Corrected KG × Sin angle of heel.
KN – Corrected KG × Sin angle of list.
When conducting a risk assessment for a shipboard work activity, the two elements to be considered are:
The potential severity of harm and the likelihood that harm will occur.
The chance of an incident re-occuring and the potential effects of an loss.
The available manpower and their experience in this type of work.
What type of dynamic forces may cause indent in plating on forecastle deck and main deck in way of pillars inside forecastle?
Forces created by waves on the forecastle.
Pressure forces caused by green water on deck.
Slamming in way of flat bottom forward of light draught.
Impact pressure forces in way of abrupt or flared bow.
A message is sent to a fax-machine. However the message cannot be delivered by the land earth station. The land earth station will:
Will only send a non-delivery notification (NDN) to the sender if so requested by him.
Automatically send a non-delivery notification (NDN) to the sender.
Never send a non-delivery notification (NDN) if a fax message to the sender. The sender to verify if the message was received.