Heim Online-Tests CBT Alle Arten von Schiffen MASTER / Ch-Officer Test Online about Inspection of Mooring Lines (CBT 0287) (CBT)

Online-Test: Test Online about Inspection of Mooring Lines (CBT 0287) (CBT)

Wählen Sie den Testmodus:

Ausbildung

Den Test bestanden

Online-Test

Beschreibung

Rezensionen

Frage 1 aus 24

According to ISO guidelines, what type of material is indicated by a blue yarn in the strand of a synthetic fibre mooring rope? Select the ONE correct answer.

Polyester.

Polyamide (Nylon).

Polyethylene.

Polypropylene.

According to ISO guidelines, what type of material is indicated by a green yarn in the strand of a synthetic fibre mooring rope? Select the ONE correct answer.

Polyamide (Nylon).

Polypropylene.

Polyester.

Polyethylene.

According to ISO guidelines, what type of material is indicated by a red yarn in the strand of a synthetic fibre mooring rope? Select the ONE correct answer.

Polyethylene.

Polyester.

Polyamide (Nylon).

Polypropylene.

According to OCIMF guidelines, how often should a synthetic fibre rope tail be replaced? Select the ONE correct answer.

At least every 18 months.

At least every 48 months.

At least every 24 months.

At least every 36 months.

According to this module, at what percentage of the original minimum breaking load should a mooring rope be replaced? Select the ONE correct answer.

50 %.

75 %.

33 %.

60 %.

How should a synthetic fibre rope tail be joined to a mooring wire? Select the ONE best answer.

With an eye splice in both ropes.

With an approved shackle.

With an eye to eye, cow hitch.

With a series of Bulldog clips.

Where would you find the Safe Working Load of mooring fittings on-board a ship? Select the ONE correct answer.

You will find the Safe Working Load of mooring fittings in the ship’s capacity plan.

You will find the Safe Working Load of mooring fittings in the ship’s fire and safety plan.

You will find the Safe Working Load of mooring fittings in the ship’s general arrangement plan.

You will find the Safe Working Load of mooring fittings in the ship’s towing and mooring plan.

Which ONE of the options best completes the following statement? ‘A synthetic fibre tail attached to a mooring wire …

… introduces a weak link, because the fibre is not as strong as wire’.

… makes the wire easy to handle and helps absorb sudden loads’.

… can be far too elastic, allowing the vessel to surge on the berth’.

… is bad practice and not used on large vessels’.

Which ONE of the options best completes the following statement? ‘A wire mooring rope that has been heaved around a tight corner under load …

… will not suffer any damage’.

… will be safe to use in the future’.

… will not endanger the safety of the crew.

… will get a permanent kink in it’.

Which ONE of the options best completes the following statement? ‘Slipping a synthetic fibre mooring rope on a drum end …

… should be avoided, because it damages the rope’.

… should be done if excessive strain comes on the rope’.

… should be done by experienced seamen only’.

… should be done with only three turns on the drum end’.

Which ONE of the options best completes the following statement? ‘Synthetic fibre mooring ropes …

… should be hung in the boiler room to dry when not in use’.

… should be stored in direct contact with the deck’.

… should be stowed in a safe area when not in use’.

… should never be washed with fresh water’.

Which ONE of the options best completes the following statement? ‘When spooling a new mooring wire on a fixed drum …

… start with the end of the wire found inside the coil’.

… place the coil on deck, just in front of the drum’.

… clamp one end, then drop the coil overboard to unravel it’.

… suspend the coil on a turntable or roller to stop kinks’.

Which ONE of these options best completes the following statement? Inspection records for mooring ropes should be maintained on-board because …

… the flag State require this to be done on all vessels.

… everyone on-board, and any inspectors, can see that the ropes have been inspected and are fit for purpose.

… there is an OCIMF regulation stating this practice is to be followed on board all tankers.

… the ISM code requires it to be followed on all vessels.

Which ONE of these options correctly completes the following statement? ‘Six strand, ‘wire laid’ synthetic fibremooring ropes …

… are never used for mooring ropes’.

… are particularly suited to use on self-tensioning winches’.

… are not suited to use on fixed mooring drums and winches’.

… stretch excessively when under tension’.

Which of the options correctly describe the easiest way to identify a mooring rope? Select the ONE correct answer.

By its colour.

From the tag, if fitted.

From the stored certificate.

By its position on the vessel.

Which of the options correctly describes ’actinic action’ seen on a mooring rope? Select the ONE correct answer.

It occurs when acid has attacked the fibres of a mooring rope.

It is when UV radiation changes the chemical nature of the rope fibre.

It is a technical description for a mooring rope stretching.

It is the action of the rope when it parts with excessive strain.

Which of the options correctly describes the typical construction of a wire mooring rope? Select the ONE best answer.

6 × 36 or 6 × 41.

Only ever 6 × 41 and a fibre core.

6 × 24 or 6 × 36.

Only ever 6 × 36 and a wire core.

Which one of these options best describes the desirable characteristics of a wire mooring rope? Select the ONE best answer.

The wire should be strong, but stretch easily.

The wire should have a small diameter to make for easy handling.

The wire should be strong, easy to handle and with low stretch.

The wire should be strong, with absolutely no stretch at all.

Which one of these options best describes why mooring ropes have chafing mats and sleeves fitted to them? Select the ONE best answer.

It is mandatory to do so.

To increase the strength of the rope.

To protect the rope from being chafed.

To protect the fairlead through which the ropes pass.

Which one of these options correctly describes the characteristics of polyester rope? Select the ONE correct answer.

Expensive to buy, heavy, good abrasion resistance.

Light to handle, water resistant, stretches easily.

Resistant to ultra violet, always three stranded, good abrasion resistance.

Cheap to buy, heavy, good resistance to stretch.

Which one of these options correctly describes why mooring ropes are part of a SIRE inspection? Select the ONE best answer.

To ensure that a vessel can be safely moored.

To save the vessel crew from having to inspect them.

To comply with the ISM requirements.

To check for poor quality ropes that need replacing.

Why are “snap back” zones painted in the mooring areas of a ship? Select the ONE correct answer.

To warn of a tripping hazard.

To warn crew not to stand in that zone when a rope passing through that lead is under strain.

It serves no purpose.

Crew can seek protection in these areas if the wind picks up.

Why is it NOT recommended to ’short splice’ a synthetic fibre mooring rope if it has parted? Select the ONE correct answer.

Because the short splice looks out of place on a modern ship.

Because the short splice makes it difficult to work the rope on a drum end.

Because the short splice weakens the overall strength of the rope.

Because it creates an unwanted strong point.

Why is it important to spool a wire mooring rope onto a traction drum evenly? Select the ONE best answer.

Because the wire takes up less space.

Because the wire looks nice when spooled on neatly.

Because the friction on the traction drum will be greater.

To stop the wire burying and being damaged when under load.

Тест проверяет знания о проверке и обслуживании швартовных линий, включая выявление износа, разрывов и методов их замены.

Nur Segler können Bewertungen hinterlassen. Um eine Bewertung abzugeben, melden Sie sich mit Ihrem Sailor-Konto auf der Website an.

Seien Sie der Erste, der diesen Online-Test bewertet!