Тест состоит из 80 случайных вопросов.
Всего вопросов по данной теме: 95
Which Security Levels requires the highest security alert?
What percentage of the baggage is required to be checked at Security Level 1?
The percentage is not specified.
5-15 % of the baggage is required to be checked at Security Level 1.
25-50 % of the baggage is required to be checked at Security Level 1.
100 % of the baggage is required to be checked at Security Level 1.
If circumstances permit, how should low expansion foam be applied to oil burning near a bulkhead of the engine room?
The foam should be aimed at the bulkhead behind the fire and allowed to spread out slowly over the fire.
The applicator should be used in a sweeping motion to spread the foam over the surface.
The foam should be applied to the centre of the fire.
The foam should be aimed at about 45° upwards so that it can drop onto the fire.
The fire point is:
The minimum temperature at which a combustible gives off vapours that may burn in contact with oxygen in air, and at which combustion persists once the source of ignition has been removed.
The maximum pressure that will be reached when a given combustible burns into an enclosed space.
The minimum temperature at which a combustible gives off vapours that may burn when they are in contact with oxygen in air, when there is a presence of activation energy; but with no capacity of maintaining combustion.
A process of chemical decomposition by oxidation-reduction at unusually high temperature, in areas with slight ventilation.
Which is the “CAPSTAN”, in the figure?
The Capstan is indicated by A.
The Capstan is indicated by B.
The Capstan is indicated by C.
The Capstan is indicated by D.
On a fire patrol at night you see smoke coming from a closed cabin door. What action should you take first?
Activate the nearest fire alarm button and advise bridge of the location of the fire.
Take a look inside the cabin to see what the situation is.
Get the nearest fire extinguisher and then open the door to see what the situation is.
As most people are sleeping, call a friend and ask him to assist in putting out the fire.
What is the correct understanding of the term “FAIRLEAD”?
The access point where mooring lines are lead when making fast to the shore.
A fairlead is the hole through the deck where the anchor chain passes into the chain locker.
A fairlead is the direction that a mooring rope makes from the ship when made fast to the shore.
What is the absolutely main purpose with fighting a fire on board?
What is the correct understanding of the term “boat deck”?
The deck where the top of the lifeboats can be viewed.
The deck of a ship at the base of the accommodation.
The deck which is at the top of the double bottom tank on a cargo ship.
The deck where the lifeboats davits are positioned.
According to their physical state, extinguishing agents may be classified in to:
Solid, proteinic and gases.
Synthetic, proteinic, gases and liquid.
Which type of equipment can be used to detect explosives?
Which of the following are frequent causes of fires in accommodation?
1 – Smoking in bed, 2 – Covering of electric fires with blankets, 3 – overloading electric plugs.
Covering of electric fires with blankets.
Overloading electric plugs.
On a bulk carrier at the completion of loading and before closing hatch covers, the track ways must be:
Track ways swept and checked clear of obstructions.
What is the main advantage of a positive pressure breathing apparatus?
If the face mask has a leak toxic fumes/smoke would still not enter the mask.
It ensures a constant supply of air.
The positive pressure makes it easier to breathe when working hard.
It is less complicated and cheaper than a breathing apparatus of the demand type.
Which of these are indicators that an individual may be a drug smuggler?
The individual wears bulky or out of season clothing.
The individual spends his or her free time hanging out with others.
The individual makes small local purchases.
The individual is disinterested in the ship’s cargo.
During a bomb search, which of the following is an important principle to follow?
Do not touch any suspicious packages.
Throw any suspicious items overboard.
Know exactly what a bomb looks like.
Try to reach behind bulkheads to find a bomb.
Who is responsible for ensuring your ship completes a security assessment?
Company Security Officer.
Flag State Administration.
Recognized Security Organization.
A stevedore is working in a cargo hold of a bulk carrier while completing discharge of a concentrate cargo. You suddenly notice that he appears to be taken ill. You should:
Assume problem due to lack of oxygen and/or toxic gas and rescue with self-contained breathing apparatus.
The foreman stevedore will deal with this situation.
Immediately enter space and give first aid.
Assume possible heart attack and give CPR.
Which of these actions should crew take if a suspicious object that may be a bomb is located during a search?
Confirm with their search partner that the object found is suspicious.
Place the object in a desk drawer or file cabinet.
Throw the object overboard.
Cover the suspicious object with a box or blanket.
On the figure there are four (4) possible definitions of the term “BOLLARD” given. Which one is the correct one?
Bollard is given by C on the figure.
Bollard is given by D on the figure.
Bollard is given by B on the figure.
Bollard is given by A on the figure.
Which of these are indications that a parcel is suspicious?
The parcel is addressed to no one in particular, arrives unexpectedly and seems heavy for its size.
The parcel smells like chocolate.
The parcel came from Joe in the safety department and arrived quicker than expected.
The parcel is wrapped in clean, brown paper and is addressed to a crewmember from his wife.
One of the checks during the annual Class survey of the UMS functions is focusing on cleanliness of the engine room. What is the reason for such a check?
To reduce the general risk of fire in an unmanned engine room.
To avoid frequent alarms.
To have the engine room looking tidy.
To prevent risk of pollution.
Monoammonium phosphate used as a dry powder can be effective on which of the following type of fire?
Solid, liquids, and gases.
Solid, liquid, gases and metals.
What is the purpose of the Ship Security Plan?
Protect your ship from risks posed by security threats or incidents.
Outline specific measures for your ship to move from security level 1 to 2 and from 2 to 3.
Detail the duties of shipboard personnel assigned security responsibilities.
Outline the organizational structure for the ship.
Which of these weapons are widely available and commonly used by criminals and terrorists to further their aims?
The Declaration of Security:
Addresses the security requirements shared between ships or between a port facility and a ship.
Details a ship’s security measures.
States the reporting procedures to government contact points.
Identifies the security responsibilities of shipboard personnel.
On the figure there are four (4) possible definitions of the term “WINDLASS”. Which one is the correct one?
Windlass is given by C on the figure.
Windlass is given by D on the figure.
Windlass is given by B on the figure.
Windlass is given by A on the figure.
Watch keeping engineers shall have a minimum knowledge of the vessel’s engine room and operation of its functions prior to being accepted as Engineer on Duty, and shall acknowledge his familiarization with the equipment by signing a check list listing all units he shall be able to operate. Minimum knowledge is:
He shall have all the knowledge as listed in the other alternatives.
Understand the function of all main and auxiliary equipment, e. g. machinery, pumps, fuel systems, cooling systems and the interlinks between various units and the function of them.
Check routines during operation and prior to switching to UMS-mode.
Start, operate and stop main and auxiliary machinery units, including switching between automatic, remote and/or manual control functions, and operate the various units in various modes.
The aim of fire detection is:
All the answers are correct.
To discover where a fire starts.
To begin applying an emergency plan.
Where may as a general rule pressure containers for gas fire-extinguishing medium be kept? SOLAS II-2/5.1.10.
Outside the space which is to be protected.
In the space which is to be protected.
On the diagram, which letter indicates what is meant by the word “DRAUGHT” of the ship?
Draught is indicated by D, in the figure.
Draught is indicated by B, in the figure.
Draught is indicated by C, in the figure.
Draught is indicated by A, in the figure.
The best way to identify an IED is to:
Recognize its components.
Measure the size of the object.
Via Inmarsat-C a message is sent to an Inmarsat-C mailbox with a positive delivery notification (PDN). The ground station will:
Send a PDN, if the message has arrived in the mailbox.
Send no PDN’s with messages intended for the mailbox.
Send a PDN, as soon as the message is collected from a mailbox.
In which one of the following an oil, the flash point of which only needs to be over 43 °C, may be used?
How can the effects of “Squat” be minimized, when a ship is proceeding in shallow water?
Maintain a slow speed just sufficient to maintain steerage.
Enter the shallow water with a stern trim and proceed at a moderate speed.
Decrease the speed and keep the ship to the centre of the channel where the water is probably deepest.
Maintain a speed of about 6 knots and use minimal rudder when manoeuvring.
The extinguishing agent which can be applied on any fires of class A, B or C is:
With an Inmarsat-C installation there is the addressing-option “special”. Via this option:
Give one of Inmarsat’s “special access codes”.
You can send a message by express delivery.
You can deliver a message via a special telegram.
Which statement about IED’s is true?
All IED’s have four common components.
IED’s don’t cause serious damage.
IED’s are difficult to manufacture.
In the diagram, which arrow is pointing at the position known as the “Bridge”?
The Bridge is indicated by A in the figure.
The Bridge is indicated by D in the figure.
The Bridge is indicated by B in the figure.
The Bridge is indicated by C in the figure.
If the radar is set onto the Relative Motion Display, what would an echo of a target with no trail indicate? Note this the trail of the echo and not a vector.
The target is on the same course and speed as own ship.
The target is stopped and making no way through the water.
The target is on a constant bearing and getting closer to own ship.
The target is on a collision course with own ship.
This device can detect a package of drugs inside a large delivery of ship’s stores. What is it?
In general what is the proportion of concentrate to water to produce foam?
This operation is done automatically and in relation to the foam.
What is the purpose of the Ship Security Plan?
Protect your ship from risks posed by security threats or incidents.
Outline specific measures for your ship to move from security level 1 to 2 and from 2 to 3.
Detail the duties of shipboard personnel assigned security responsibilities.
Outline the organizational structure for the ship.
To guarantee optimal reception of VHF-DSC calls, every:
DSC-symbol is sent twice and checked extra by Error Check Character.
DSC-report is sent twice, at least every second call is compared with the earlier received call.
DSC-calls are repeated until received.
DSC-symbol is checked on the right amount of 10, and then checked on the correct relation by Error Checked Character.
Which statement about the use of profiling onboard a ship is true?
A random selection process must be established.
Detection equipment can be used in place of profiling.
Profilers need at least half an hour to gather the information they need.
Only visitors can be profiled.
“Overshoot” is an expression we use when talking about a ship’s steering ability. What is the definition of this expression?
It is the way a ship turns when you put the helm in a hard over position.
It is how many degrees a ship continues to turn after you apply counter rudder.
It is the way a ship shoots forward when you give “a kick ahead”.
It is the way a ship continues to turn when the helm is put amidship.
What is the minimum capacity of the portable tank of a portable foam applicator?
How does low expansion foam act as an extinguishing agent when dealing with oil fires?
By smothering and also by providing some cooling.
The heat from the fire causes the foam to produce an inert gas which gradually extinguishes the fire.
Which of the following areas may be possible restricted areas? Review all answers.
Searches are often triggered by:
An increase in security level by the Flag State.
The receipt of a shipment of damaged stores.
News stories of stowaways.
When can a partly loaded bulk cargo space be entered when the vessel is at sea?
For hatch cleaning purposes.
On instructions from the CPO (Bosun).
In no circumstances except possibly in an emergency.
If circumstances permit, how should low expansion foam be applied to oil burning near a bulkhead of the engine room?
The foam should be aimed at the bulkhead behind the fire and allowed to spread out slowly over the fire.
The foam should be aimed at about 45° upwards so that it can drop onto the fire.
The applicator should be used in a sweeping motion to spread the foam over the surface.
The foam should be applied to the centre of the fire.
Why should Ground Stabilised True Motion display mode be avoided when using the ARPA for anti-collision purposes?
The collision regulations are based on ship courses through the water.
The Relative Motion display and relative vectors is the only display to use for anti-collision purposes.
The true vector can never give an indication of collision risk with another ship.
True motion does not provide the collision risk of other ships.
Which activity will have the greatest fire-fighting effect in case of a fire?
Extinguishing attempt is started immediately.
All fire-fighting teams are organized as soon as possible.
All possible fire-fighting equipment is brought to the scene.
What is understood by the term “Boat Drill”?
“Boat Drill” means the practical training in the various aspects of getting all the people onboard safely off the ship, in the event of abandoning ship.
“Boat Drill” is an exercise to launch the lifeboats and move the boats clear of the ship.
“Boat Drill” is an exercise in the practical and safe methods to secure a boat alongside the ship.
“Overshoot” is an expression related to a ship’s steering ability. What is the correct understanding of this expression?
It is how many degrees of the compass a ship continues to turn after applying counter-rudder.
It is the way a ship turns when putting the helm in a hard over position.
It is the amount a ship moves forward after the engines are stopped.
It is the way a ship continues to turn when the helm is pup amidships.
On the figure there are four (4) possible directions shown by the arrowed lines. Which one would correctly shows the direction understood by the term “AFTER SPRING”?
After spring is defined as B.
After spring is defined as C.
After spring is defined as D.
After spring is defined as A.
What is the correct understanding of the term “gangway”?
Portable bridge arrangement between ship and shore, when alongside.
The ladder arrangement to allow walking access down the ship’s side into a boat alongside the vessel.
The access arrangements on an oil tanker between the bow and the after accommodation.
Who is responsible for completing the DoS on behalf of the ship?
Company Security Officer.
On the figure there are four (4) possible directions, shown by the arrowed lines, which could be the correct direction associated with the term “HEAD LINE”. Which one is the correct one?
Head line is given by C on the figure.
Head line is given by D on the figure.
Head line is given by B on the figure.
Head line is given by A on the figure.
The best way to identify an IED is to:
Recognize its components.
Measure the size of the object.
Which of these procedures should crew follow when conducting a bomb search?
Stand quietly in various spots around the space, listening for unusual sounds like the tick tock of a clock mechanism.
Wait in the area they’ve finished searching until they’re contacted for a status update.
Conduct random or spot checks of logical threat areas.
Search the perimeter of the space up to a height of 5 feet.
When a ship is steaming along a course line, what is the importance of determining the set and rate of drift due to wind and current?
All of the suggested answers.
To appreciate the possible extent of drift and dangers in the event of engine failure.
To determine the time required to reach the next alteration of course point.
To determine the correction required to the course steered to maintain the planned passage.
Who is responsible for issuing an ISPS certificate?
What paint coating should be used in a cargo hold of a bulk carrier, when the hold may be used for the carriage of grains?
Approved for use in cargo spaces that may carry edible cargoes.
Any paint type can used in these spaces.
Paint must be epoxy based.
Cargo spaces must not be painted.
When handling drugs:
Wear skin protection and a facemark.
Shut off the ventilation in the room where the drugs are being stored to ensure any vapours or fumes do not spread to other parts of the ship.
Test out the potency of the drug.
Briefly inhale powders, fumes or vapours to verify the substance is a drug.
One of the categories of information that must be included in your SSP is:
Weaknesses in security measures.
If a fire starts in the fuel tanks of a vessel, the fire will be:
What is the inherent danger in welding/cutting in piping containing freon?
Development of nitrous gases.
Depletion of the ozone layer.
Depletion of oxygen in the air.
Development of explosive gases.
In order to extinguish a flammable liquid of the same kind as alcohol, we can use:
Which of these conventions is The International Ship and Port Facility Security (ISPS) Code a part of?
The Anti Terrorist International Agreement.
What kind of safety clothing should be worn during a mooring operation?
Helmet, safety shoes, gloves and protective clothes.
Safety shoes and boiler suit.
No particular safety clothes are required.
Apart from red, what other colour is frequently used for a dry powder extinguisher?
The method of extinction by smothering is based on this basis:
The fire extinguished by avoiding the contact between the fuel vapours and the oxygen.
The fire is extinguished by eliminating the heat so as to obtain a temperature at which the fuel doesn’t give off enough vapour.
The fire is extinguished by interrupting the chain reaction, as it stops the transmission of heat by means of the action of chemical agents.
The fire is extinguished by avoiding the contact between the fuel vapours and the hot surface.
When could there be a demonstration of how to start a lifeboat engine?
A demonstration could be arranged during a lifeboat drill.
There is an instruction card inside the lifeboat showing how to start the engine.
A demonstration is not necessary, because there are a limited number of persons who given the responsibility for starting the lifeboat engine.
Starting the lifeboat engine is very easy and there does not need to be any demonstration.
Which of these types of information is considered sensitive?
Voyage itinerary and departure and arrival times.
Planned maintenance schedule and emergency response procedures.
Way points and training records.
Ship schematic and HR policies.
Who is authorised to operate lifting equipment around the ship?
Those ship’s personnel who have been assessed as competent and are duly authorised to do so by the master as per the procedures as outlined in the ship’s SMS system.
Deck officers and ratings, engineering officers and ratings, GP crew if applicable, who are in possession of crane operation training certificates issued by the company.
Stevedores manufacturer’s maintenance engineers and senior ratings only.
All the deck officers and ratings and selected engine-room personnel.
What is the correct understanding of the term “Block Coefficient” as applied to a ship?
The comparison of the underwater shape of the ship, to a rectangular block of the same extreme dimensions.
The ratio of the waterplane shape of the ship to a rectangle of the same extreme dimensions.
The restriction of a valve in a pipe to the flow of fluid through that pipe.
The coefficient of a Block and Tackle.
What must be done after completion of ballasting operations on a bulk carrier?
All valves closed, tank ventilators in open position and sounding pipe caps replaced.
Sounding pipe caps left off.
All valves and lines left open.
All valves closed and tank ventilators to closed position.