An order printer unit is fitted at:
The emergency control el. box.
AutoChief 4 is the fourth generation of remote control system for:
Medium speed diesel engine.
High speed diesel engine.
Low speed main engine by New Sulzer Diesel or MAN B&W.
All types of main engine.
Digital Governor Unit receives speed command through:
During Bridge Control Manoeuvring the Starting and Stopping of Main Engine is done with the help of:
During Engine Control Room Manoeuvring the Main Engine is Started and Stopped with the help of:
During normal operation from Bridge the Main Engine can be stopped by:
Engine Room Panel is subdivided into how many fields?
From where does AutoChief 4 takes RPM command information?
How does the bridge unit transfer command to ECR unit?
How many pick-ups are fitted for detection of RPM?
If you are manoeuvring from Engine Control Room, will the telegraph order be recorded at the Bridge OPU?
In AC4 remote control system, manoeuvring of ME can be carried out from:
From all three locations.
Indication Field contains ____ indication lamp.
Name the field that contains “Rough Sea Mode” function:
Pneumatic Valve Cabinet controls:
All three functions of Main Engine.
Reversing of Main Engine.
Slow turning Diode will be illuminated when Engine has been stopped for:
Start Air Transducer detects:
Available air pressure in the Engine room.
System Warning & System Fail indication will be activated when:
The RPM Detector system has failed.
The Safety System Unit is malfunctioning.
The Engine fails to start.
The Engine failed to reverse.
The bridge panel is subdivided into how many fields?
The fuel rack of the engine is regulated by:
Digital Governor Unit (DGU).
The function of Engine Control Room Telegraph is to:
The main purpose of telegraph lever is:
To give only RPM Command to Engine.
To give both, direction and RPM Command.
The pick-up for measuring RPM is located:
The reversing of Main Engine is done through a set of:
The speed set lever controls:
The direction of Main Engine.
Speed as well as start & stop o Main Engine.
What are the functions of “Cancel” buttons?
To cancel Engine Shut-down function.
To cancel Slow-down function.
To cancel Speed Limitation.
What component is installed at all three locations in AC4 remote control unit?
What is this?
This is the Emergency Control El-box, used for informing the operator about safety actions and direction of rotation as well as for cancelling shut-downs and emergency stop.
This is the local Telegraph Unit, used for receiving and acknowledge of manoeuvre orders from bridge, when the engine is controlled from local stand.
This is the electric Actuator, used for regulating the supply of fuel to the main engine.
Which one is not a part of Safety System Unit?
Which one of the following statement are true?
The fourth generation of remote control system for low-speed main engines made by New Sulzer Diesel or MAN B&W.
The fourth generation of signals control system for high-speed main engines made by New Sulzer Diesel or MAN B&W.
The third generation of signal control system for high-speed main engines made by New Sulzer Diesel or MAN B&W.